Şunu aradınız:: windows 98se (İngilizce - Çince (Modern))

windows
windows

& windows
窗口( w)

2 windows* 98se only
2 仅限 microsoft* windows* 98se

windows* 98se shutdown problems
windows* 98se 关机问题

if you have windows* 98se, me or 2000:
如果您使用 windows* 98se、me 或 2000：

desktop boards - windows* 98se shutdown problems
台式机主板 - windows* 98se 关机问题

windows 98se and windows me fresh installation instructions
windows 98se 和 windows me 初次安装说明

windows* me, windows* 98se, and windows* 98 users
windows* me、windows* 98se 和 windows* 98 用户

first time installing sii raid driver with existing windows 98se/me
在现有的 windows 98se/me 中第一次安装 sii raid 驱动程序

this timing issue does not effect windows* 98se (second edition).
这个时钟问题不影响 windows* 98 se （第二版）。

update sii raid driver on windows 98se/me with existing silicon image driver
在已有 silicon image 驱动程序的 windows 98se/me 下更新 sii raid 驱动程序

drive not recognized during install of microsoft* windows 98se or windows* me
在安装 microsoft* windows 98se 或 windows* me 过程中，不能识别驱动器

drive not recognized during install of microsoft* windows* 98se or windows* me
在安装 microsoft* windows* 98se 或 windows* me 的过程中，不能识别驱动器

after the system is restarted, windows* 98se or windows* me can be installed normally.
重新启动系统后，便可正常安装 windows* 98se 或 windows* me.

follow the normal windows 98se/me setup instructions to select your choice for partition and file system.
按照正常的 windows 98se/me 设置说明选择所希望的分区和文件系统。

desktop boards - drive not recognized during install of microsoft* windows 98se or windows* me
台式机主板 - 在安装 microsoft* windows 98se 或 windows* me 过程中，不能识别驱动器

resolves intermittent blue screen occurrences that can occur when installing the driver in microsoft* windows* 98se or windows* me
解决了在为 microsoft windows* 98se 或 windows* me 安装驱动程序时间歇蓝屏的产生。

if you have an existing windows 98se/me system you need to run the update program to install silicon image driver. the driver package is located in the silicon image driver diskette.
如果您已装有 windows 98se/me 系统，您需要运行更新程序安装 silicon image 驱动程序。驱动程序包位于 silicon image 驱动程序磁盘上。

resolves an issue with raid1 mode while running microsoft windows* 98se or windows* me, whereby the serial-ata firmware incorrectly prompts the user to rebuild the raid1 array
解决了运行 microsoft windows* 98se 或 windows* me 时关于 raid1 模式的一个问题，该问题是serial-ata 固件不正确提示用户重建 raid1 阵列

put your windows 98se/me cd into the cd-rom/dvd drive, and the windows 98se/me boot diskette in the floppy drive if your system cannot boot from the cd.
把 windows 98se/me cd 插入 cd-rom/dvd 驱动器，如果系统不能从 cd启动，把 windows 98se/me 驱动磁盘插入软驱。