İnsan çevirisi örneklerinden çeviri yapmayı öğrenmeye çalışıyor.
Kimden: Makine Çevirisi
Daha iyi bir çeviri öner
Kalite:
Profesyonel çevirmenler, işletmeler, web sayfaları ve erişimin serbest olduğu çeviri havuzlarından.
questo è il modo in cui si impegna il riduttore con la seconda frizione - uno che con uno stretto margine.
that's the way engages the gear unit with the second clutch - one that with a narrow margin. it can be seen that the teeth of the pinion entered the slave so that the edges do not touch the teeth of the coupling.
realizzata completamente in alluminio, ne esistono versioni in cui è presente il tubo del vapore per montare il latte e alcuni rari modelli con manometro e base con resistenza elettrica.
made completely of aluminum, there are versions with the steam pipe to mount the milk and some rare models with pressure gauge and electrical resistance.
ps-50 abc è un estintore pressurizzato a polvere con manometro e valvola di sicurezza, adatto per usi generali, a protezione di ambienti ove l’incendio può assumere proporzioni pericolose.
ps50 abc is a stored pressure abc powder fire extinguisher with pressure gauge and safety device, suitable for general uses, and where a fire may reach dangerous proportions.
i vantaggi di questa struttura verticale sono, tra gli altri, minor rumore, minori rischi per gli uccelli, nessun riduttore, con tutti i suoi rischi associati e possono essere installate più vicine rispetto alle tradizionali turbine eoliche.
the benefits of this vertical configuration include lower noise, less risk to birds, no gearboxes and their associated mechanical issues, and they can be erected closer together than traditional wind turbines.
entrambe le tipologie di filtri devono essere montate con manometri a monte e a valle per poter tenere continuamente sotto controllo la perdita di pressione, e quindi l'accumulo di particelle, e sostituire il filtro quando necessario.
all filters (bags or cartridges) in a cartridge filter system should have pressure gauges on each side of the filter so that head loss, or accumulation of debris, can be monitored continuously and the filters changed when necessary.