From professional translators, enterprises, web pages and freely available translation repositories.
holes
imigubasi
Last Update: 2023-10-13
Usage Frequency: 1
Quality:
%1 holes
% 1 imingxuma
Last Update: 2011-10-23
Usage Frequency: 2
Quality:
number of holes
inani lemingxuma:
Last Update: 2011-10-23
Usage Frequency: 2
Quality:
holes may have to be enlarged.
iminyaka ingandiswa.
Last Update: 2018-02-15
Usage Frequency: 1
Quality:
two holes are then bored on these lines.
imingxunya emibini ngoko igrunjiwe/ibhorelwe kule migca.
Last Update: 2018-02-15
Usage Frequency: 1
Quality:
when this had set, the limber holes were plugged.
xa oku kusethule, imingxunya evetye-vetye yavalwa.
Last Update: 2018-02-15
Usage Frequency: 1
Quality:
hawse hole stoppers that completely close the holes.
izimiso zomngxuma ezivala gingci imingxuma.
Last Update: 2018-02-15
Usage Frequency: 1
Quality:
this is done by passing stop pins through holes in both.
le yenziwa ngokugqitha indawo ekuma isiqhobosho ngaphaya komngxunya kumacala.
Last Update: 2018-02-15
Usage Frequency: 1
Quality:
next, bore corresponding holes into but not through the timbers.
enye, grumba imingxunya emeleneyo kuyo, kodwa hayi ngamaplanga.
Last Update: 2018-02-15
Usage Frequency: 1
Quality:
this is secured by six shoulder screws in a choice of holes.
le ikhuselwe ngesithandathu samagxa isikrufu sokukhetha imingxunya.
Last Update: 2018-02-15
Usage Frequency: 1
Quality:
holes cut in the bulwarks of a ship to enable water to drain overboard.
yimingxuma esikwe kwisikhuselo esijikeleze inqanawa ngaphezulu ukwenzela ukuba amanzi aphumele ngaphandle enqanaweni.
Last Update: 2018-02-15
Usage Frequency: 1
Quality:
but any holes thus made will have to be patched and made good again before refloating.
kodwa nayiphina imingxunya eyenziwayo ujakufuneka ivalwe yenziwe ilunge kwakhona phambi kokuba iphinde idadiswe.
Last Update: 2018-02-15
Usage Frequency: 1
Quality:
now bore holes in the stiffener, the planking, the copper tingle and the doublers.
ngoku grumba imingxunya kwiziqiniswa, emgangathweni weplanga, umntlontlozo wesinyithi kunye neziphindaphindi.
Last Update: 2018-02-15
Usage Frequency: 1
Quality:
all parts should be well lubricated and the oil-holes clear of paint and dirt.
zonke iinxenye kufuneka zithanjiswe kakuhle kwakunye namafutha imingxuma icacise ipeyinti nobumdaka.
Last Update: 2018-02-15
Usage Frequency: 1
Quality:
hole radius (1)
umngxunya welayini esuka embindini wesangqa eya kumda wesangqa (1)
Last Update: 2011-10-23
Usage Frequency: 3
Quality: