Results for friction translation from Czech to English

friction rub
friction rub

podešev: vibram friction
sole: vibram friction

friction: a force of nature
friction: a force of nature

the thread friction remains unchanged.
the thread friction remains unchanged.

as a result vibration is avoided and friction reduced.
as a result vibration is avoided and friction reduced.

the wedge locking method is based on tension instead of friction.
the wedge locking method is based on tension instead of friction.

since friction conditions are uneven you may not reach the necessary preload.
since friction conditions are uneven you may not reach the necessary preload.

friction is a factor not to be ignored when it comes to tensioning bolts.
friction is a factor not to be ignored when it comes to tensioning bolts.

since friction conditions vary, higher torque can be required to untighten a fastener.
since friction conditions vary, higher torque can be required to untighten a fastener.

nízká treková obuv se svrškem z hovězinové štípenky s podešví vibram friction s eva mezivrstvou.
a low shoe with the upper from split cow-hide leather with vibram friction sole.

full support for vehicle dynamics, including spring reactions, stiffness, damping, tyre friction etc
full support for vehicle dynamics, including spring reactions, stiffness, damping, tyre friction etc

to minimise this loss it is beneficial to use many small jackbolts and a lubricant with a low but stable friction coefficient.
to minimise this loss it is beneficial to use many small jackbolts and a lubricant with a low but stable friction coefficient.

a: galling is caused by a combination of friction and adhesion between metallic surfaces during sliding.
a: galling is caused by a combination of friction and adhesion between metallic surfaces during sliding.

a good lubricant is recommended in order to reduce friction, further minimise clamp load deviation and protect against corrosion.
a good lubricant is recommended in order to reduce friction, further minimise clamp load deviation and protect against corrosion.

when a bolt is tightened it is subjected to tensile stress as preload is introduced but also to torsion stress as a result of thread friction.
when a bolt is tightened it is subjected to tensile stress as preload is introduced but also to torsion stress as a result of thread friction.

a: the principle of friction locking is based on increased friction in the thread or under the bolt head/nut.
a: the principle of friction locking is based on increased friction in the thread or under the bolt head/nut.

however the bolt/nut is prevented from rotating by friction between the contact surfaces in the threads and under the bolt head/nut.
however the bolt/nut is prevented from rotating by friction between the contact surfaces in the threads and under the bolt head/nut.

nord-lock’s general tightening guidelines are taking the increased friction into account and permit to achieve a very accura te tightening.
nord-lock’s general tightening guidelines are taking the increased friction into account and permit to achieve a very accura te tightening.

for speed of tightening and cost efficiency, fewer but larger jackbolts are desirable, while a higher friction coefficient reduces the risk of self-loosening.
for speed of tightening and cost efficiency, fewer but larger jackbolts are desirable, while a higher friction coefficient reduces the risk of self-loosening.

however, during untightening, sliding occurs between the cam faces of the washers, where friction is significantly lower (see fig 2b).
however, during untightening, sliding occurs between the cam faces of the washers, where friction is significantly lower (see fig 2b).