From professional translators, enterprises, web pages and freely available translation repositories.
op de
on the
Last Update: 2014-10-08
Usage Frequency: 5
Quality:
op de ...
restaurants can be found in venosc. it is a nice point ...
Last Update: 2018-02-13
Usage Frequency: 1
Quality:
op de boot
on the boat
Last Update: 2018-02-13
Usage Frequency: 1
Quality:
op de weg…
on the way…
Last Update: 2018-02-13
Usage Frequency: 1
Quality:
op de acropolis
at the acropolis
Last Update: 2018-02-13
Usage Frequency: 1
Quality:
op de bovenbil.
from the topside.
Last Update: 2019-05-31
Usage Frequency: 1
Quality:
op de benedenverdieping :
on the groundfloor:
Last Update: 2018-02-13
Usage Frequency: 1
Quality:
(op de larus!)
(on the larus!)
Last Update: 2018-02-13
Usage Frequency: 1
Quality:
gemeten aan de buitenzijde van de voorruit en op de snijlijn van vlak 1.
measured on the outer surface of the windscreen and on the trace of plane 1.
Last Update: 2014-11-21
Usage Frequency: 1
Quality:
de horizontale waarnemingsrichting moet nagenoeg loodrecht op de snijlijn van de voorruit met het horizontale vlak worden gehandhaafd.
the direction of observation in the horizontal plane must be maintained approximately normal to the trace of the windscreen in that plane.
Last Update: 2017-04-06
Usage Frequency: 1
Quality:
de eventuele ondoorzichtige verduistering die begrensd wordt door de snijlijn van het buitenvlak van de voorruit:
any opaque obscuration bounded by the intersection of the outer surface of the windscreen:
Last Update: 2014-11-21
Usage Frequency: 1
Quality:
4.) neem de itlc-strip uit de ontwikkelkamer en snijd de strip in twee delen op de snijlijn bij 3,5 cm.
4.) remove itlc strip and cut in half at the 3.5 cm cut line.
Last Update: 2011-10-23
Usage Frequency: 1
Quality:
Warning: This alignment may be wrong.
Please delete it you feel so.
lijn cr valt samen met de snijlijn van het bovenvlak van de zitting en de voorzijde van de rugleuning van de stoel.
line cr is coincident with the intersection line between the top plane of the seat and the front lane of the seat back.
Last Update: 2014-11-21
Usage Frequency: 3
Quality:
zone i is de zone van de voorruit die wordt begrensd door de snijlijn van de voorruit met de volgende vier vlakken:
zone i is the windscreen zone determined by the intersection of the windscreen with the four planes defined below:
Last Update: 2014-11-21
Usage Frequency: 1
Quality:
zone i - de zone van de voorruit die wordt afgebakend door de snijlijn van de voorruit met de volgende vier vlakken:
zone i - the zone of the windscreen bounded by the intersection of the windscreen with the four following planes:
.de projectieas in het horizontale vlak wordt in een nagenoeg loodrechte stand ten opzichte van de snijlijn van de voorruit met dit vlak gehouden.
the projection axis in the horizontal plane shall be maintained approximately normal to the trace of the windscreen in that plane.
nu dat we de twee vlakken geïdentificeerd hebben kan het galactische kruis samengesteld worden uit de snijlijn van deze vlakken, de galactische evenaar met de ecliptica.
now that we have identified the two planes the galactic cross can be constructed from the intersection of these planes, the galactic equator and the ecliptic.
de romp-armreferentielijn wordt gedefinieerd als de snijlijn tussen het raakvlak aan de voorkant van de ribben en het verticale langsvlak van de dummy inclusief de arm.
the torso arm reference line is defined as the intersection of the plane tangential to the front surface of the ribs and the longitudinal vertical plane of the dummy containing the arm.
de referentielijn van de torso-arm is gedefinieerd als de snijlijn tussen het raakvlak aan de voorzijde van de ribben en het verticale langsvlak door de pop inclusief de arm.
the torso arm reference line is defined as the intersection of the plane tangential to the front surface of the ribs and the longitudinal vertical plane of the dummy containing the arm.
eventuele steunpunten voor de krik en uitlaatpijpen steken niet meer dan 10 mm uit buiten de verticale projectie van de vloerlijn of de verticale projectie van de snijlijn van het referentievlak en het buitenoppervlak van het voertuig.
the jacking points (if any) and exhaust pipe or pipes shall not project more than 10 mm beyond the vertical projection of the floor line or the vertical projection of the intersection of the reference plane with the external surface of the vehicle.