Results for together is my favorite place to be translation from English to Tamil

Human contributions

From professional translators, enterprises, web pages and freely available translation repositories.

Add a translation

English

Tamil

Info

English

together is my favorite place to be

Tamil

Last Update: 2021-04-19
Usage Frequency: 1
Quality:

Reference: Anonymous

English

my favorite place is inside your hug

Tamil

நீங்கள் ஒரு சிறிய சொல் ஆனால் உலகத்தை எனக்கு அர்த்தப்படுத்துங்கள்

Last Update: 2021-02-02
Usage Frequency: 1
Quality:

Reference: Anonymous

English

sometime alone is the best place to be

Tamil

தனியாக இருப்பது எப்போதாவது நல்லது, உங்களை யாரும் காயப்படுத்த முடியாது

Last Update: 2020-02-23
Usage Frequency: 1
Quality:

Reference: Anonymous

English

near which is the garden, the place to be resorted to.

Tamil

அதன் சமீபத்தில் தான் ஜன்னத்துல் மஃவா என்னும் சுவர்க்கம் இருக்கிறது.

Last Update: 2014-07-03
Usage Frequency: 1
Quality:

Reference: Anonymous

English

every love story beautiful but ours is my favorite

Tamil

ஒவ்வொரு காதல் கதையும் அழகாக இருக்கிறது, ஆனால் நம்முடையது எனக்கு மிகவும் பிடித்தது

Last Update: 2021-01-28
Usage Frequency: 1
Quality:

Reference: Anonymous

English

he shall go before his people on the day of resurrection, and will have led them down to the fire-evil the watering-place to be led down to!

Tamil

அவன் (-ஃபிர்அவ்ன்) மறுமை றானில் தன் சமூகத்தாருக்கு முன் சென்று அவர்களை நரகத்தில் சேர்ப்பான்; (அவர்களைக்) கொண்டு போய்ச் சேர்க்குமிடம் மிகவும் கெட்டது.

Last Update: 2014-07-03
Usage Frequency: 1
Quality:

Reference: Anonymous

English

he said: 'my nation, is my tribe stronger against you than allah? you have taken him to be thrown behind you, my lord encompasses all that you do.

Tamil

(அதற்கு) அவர் கூறினார்; "(என்) சமூகத்தவர்களே! அல்லாஹ்வைவிட உங்களுக்கு என்னுடைய குடும்பத்தார் அதிக மதிப்புடையவர்களாய் விட்டார்களா? நீங்கள் அவனை முதுகுக்குப் பின் தள்ளிப் (புறக்கணித்து) விட்டீர்கள். நிச்சயமாக என்னுடைய இறைவன் நீங்கள் செய்யும் செயல்களை (எல்லாப் பக்கங்களிலும்) சூழ்ந்து (அறிந்து) கொண்டுதானிருக்கின்றான்.

Last Update: 2014-07-03
Usage Frequency: 1
Quality:

Reference: Anonymous
Warning: Contains invisible HTML formatting

English

he said: o my people! is my family more to be honoured by you than allah? and ye put him behind you, neglected! lo! my lord surroundeth what ye do.

Tamil

(அதற்கு) அவர் கூறினார்; "(என்) சமூகத்தவர்களே! அல்லாஹ்வைவிட உங்களுக்கு என்னுடைய குடும்பத்தார் அதிக மதிப்புடையவர்களாய் விட்டார்களா? நீங்கள் அவனை முதுகுக்குப் பின் தள்ளிப் (புறக்கணித்து) விட்டீர்கள். நிச்சயமாக என்னுடைய இறைவன் நீங்கள் செய்யும் செயல்களை (எல்லாப் பக்கங்களிலும்) சூழ்ந்து (அறிந்து) கொண்டுதானிருக்கின்றான்.

Last Update: 2014-07-03
Usage Frequency: 1
Quality:

Reference: Anonymous
Warning: Contains invisible HTML formatting

English

he said, 'o my people, is my tribe stronger against you than god? and him -- have you taken him as something to be thrust behind you? my lord encompasses the things you do.

Tamil

(அதற்கு) அவர் கூறினார்; "(என்) சமூகத்தவர்களே! அல்லாஹ்வைவிட உங்களுக்கு என்னுடைய குடும்பத்தார் அதிக மதிப்புடையவர்களாய் விட்டார்களா? நீங்கள் அவனை முதுகுக்குப் பின் தள்ளிப் (புறக்கணித்து) விட்டீர்கள். நிச்சயமாக என்னுடைய இறைவன் நீங்கள் செய்யும் செயல்களை (எல்லாப் பக்கங்களிலும்) சூழ்ந்து (அறிந்து) கொண்டுதானிருக்கின்றான்.

Last Update: 2014-07-03
Usage Frequency: 1
Quality:

Reference: Anonymous
Warning: Contains invisible HTML formatting

English

everything i need to know about christmas by debra wehr summary a neighbour brings a book which explains everything the family needs to know about christmas. characters mom dad child teenager grandparent neighbor script (scene: the family living room. it is the beginning of the christmas season and the family has just put up the tree. they are unpacking the nativity scene. ornaments and lights lie on the floor. dad and teenager are working on getting the lights ready to put up outside. (stage left.)) dad: how are you coming with those lights? are they all working and ready to put outside? teenager: no. i can't seem to find the one that's burnt out. maybe we should just get some new ones. dad: keep looking. we can't afford to get new lights every time one littlebulb goes out. (mom, grandparent, and child are setting up the nativity scene - stage right.) mom: here, let's put the baby jesus between mary and joseph so they can look at how sweet he is. (handing the figure to the child) child: (he is putting more figures on the table.) mom, this set looks just like the one they have at the shopping mall. grandparent: speaking of shopping malls, this shopping thing is really hard. i don't know what to get anybody. ( she helps arrange the scene as she talks) (the doorbell rings. a neighbor arrives with a gift plainly labeled: "open before christmas." mom answers the door.) mom: hello, neighbor. come on in. neighbor: hello there, everyone. (she steps into the house) mom: (noticing the wrapped gift in her hand) what do you have there? hey, it's a little early for gifts yet. we're just getting the decorations up. neighbor: this is a christmas gift that you really need to open at the start of the christmas season. so go ahead and open it now. (neighbor walks over and hands the gift to mom.) mom: thank you very much. child: she said we should open it now. can i open it? can i? mom: o.k. (handing gift to child. child opens gift as everyone looks on) grandparent: let's see what it is. ( child holds up a large book.) dad: "everything i need to know about christmas." now i see why we needed to open it right now. it will help us organize ourselves during this busy time of year. i bet there's a schedule for saving, shopping, putting up lights, christmas programs and rehearsals. (sighs) that would sure come in real handy. mom: probably there are some new decorating ideas. those mini-marshmallows we used as fake snow made such a mess last year. they got smeared all over the windows, it took hours to scrape them off. teenager: if it tells me i should start saving for christmas by taking some money from each allowance starting in september. . . they may as well forget it. it's too late for that. grandparent: i do hope that it has some shopping tips. i just don't know what to get teenagers. my friend told me that teenagers like cds. but last year ryan didn't seem pleased at all with the "perry como" cd, i got him. neighbor: you're going to have to read it to find out. dad: let's quit guessing and see what it says. (dad walks over and takes the book and reads the title again.) everything i need to know about christmas: (turns the page) - i learned from ... jesus? teenager: that's silly. how can jesus have known what kind of presents to buy for people today, or how to find the one bulb in the string that is burnt out and keeps the rest of them from lighting up. that's something i need to know. mom: i don't think that's what this book is all about. grandparent: i don't think that's what christmas is all about, either. child: what do you mean? neighbor: just read it. you'll see what it means. dad: it says: (turns page &continues reading) "these are the important facts of the real christmas. every one of them tells us more about jesus. you need to know that jesus was god's only begotten son. he came to earth to save sinners, didn't stop till he was done" teenager: let me read some, dad. (he stands next to dad and reads) "god loves us very much. but sin, he cannot stand jesus came to pay sin's price. he came at god's command" mom: hey, this really is why we celebrate christmas(mom turns page and reads) "jesus taught us what to do how to act the whole year through visit the lonely, be kind to the poor, help the sick to find a cure. obey the lord as you are told and you will wear a crown of gold" neighbor: this is my favorite part (excitedly quoting from the book) "make your life a prayer, show others that you care. have peace and joy all your days give glory & thanks to god always" grandparent: i like that. (takes over reading) jesus was gentle and good. living and loving just as we should. dad: (taking the book and standing next to mom) jesus showed me by his examples, how he laughed, and why he cried. he showed me that he loved me, and paid for my sins when he died. mom: they called jesus: "emmanuel; which means: god with us. (pause) that's odd. for it's only because he died for us. that we can now be : (pause) "us with god" neighbor: see, this book helps give you the real meaning of christmas child: oh. now i see what you mean. neighbor: (as she leaves ) merry christmas. everyone: merry christmas!

Tamil

கிறிஸ்துமஸைப் பற்றி நான் தெரிந்து கொள்ள வேண்டிய அனைத்தும் டெப்ரா வெஹ்ரின் சுருக்கம், ஒரு பக்கத்து வீட்டுக்காரர் கிறிஸ்துமஸ் பற்றி குடும்பம் தெரிந்து கொள்ள வேண்டிய அனைத்தையும் விளக்கும் புத்தகத்தைக் கொண்டு வருகிறார். கதாப்பாத்திரங்கள் அம்மா அப்பா குழந்தை டீனேஜர் தாத்தா பாட்டி பக்கத்து வீட்டு ஸ்கிரிப்ட் (காட்சி: குடும்ப வாழ்க்கை அறை. இது கிறிஸ்துமஸ் சீசனின் ஆரம்பம் மற்றும் குடும்பம் மரத்தை வைத்துள்ளது. அவர்கள் நேட்டிவிட்டி காட்சியை அவிழ்க்கிறார்கள். ஆபரணங்களும் விளக்குகளும் தரையில் கிடக்கின்றன. அப்பா மற்றும் இளைஞர்கள் விளக்குகளை வெளியில் வைப்பதற்கு தயார்படுத்தும் பணியில் ஈடுபட்டுள்ளனர். (மேடை

Last Update: 2021-12-20
Usage Frequency: 1
Quality:

Reference: Anonymous
Warning: Contains invisible HTML formatting

English

my country , if i become the prime minister being a prime minister of india, would be a great matter of pleasure and it would have more responsibilities . being a prime minister , i shouldn't forget about the poor farmers of the country. being a prime minister, i would like to make a country - a stronger & educational country. i would also be devoted to build a country which would be a safe place to all humans and animals where everyone are given importance and dignity. i would also try to serve as a role model for the whole country, that is i should be the centre of motivation and inspiration to everyone in all forms. i will try to create a government which would be answerable to the people and will stand by their interests. i will stress on the fact that environment is to be rehabilitated , i would ask my citizens to come and rehabilitate every single destroyed part of environment. we, as a country would try to bring up development in all sectors through honesty and dedication. looking forward, i aim to make the country, the best place in the earth to live in. i would stick to secularism, maintaining a equal status of all religions. i would like to provide employment for all my citizens in every possible way .hence i conclude that, bringing up development with peace and harmony would be my goal. read more on brainly.in - https://brainly.in/question/4894623#readmoreno

Tamil

c / t

Last Update: 2020-03-11
Usage Frequency: 1
Quality:

Reference: Anonymous
Warning: Contains invisible HTML formatting

English

my role model essaythere are many people in the world who blindly follow anyone. also, they admire and love that person no matter what he does. a role model is a person who inspires you to be like him. moreover, a role model is the person you love and want to be like him. besides this, the role model can be anyone from a celebrity to a politician to your family member. role model essay my role model the missile man of india dr. apj abdul kalam is my role model. he is my role model not because

Tamil

எனது முன்மாதிரி கட்டுரை உலகில் யாரையும் கண்மூடித்தனமாகப் பின்தொடரும் பலர் உள்ளனர். மேலும், அந்த நபரை அவர் என்ன செய்தாலும் அவர்கள் போற்றுகிறார்கள், நேசிக்கிறார்கள். ஒரு முன்மாதிரி என்பது அவரைப் போல இருக்க உங்களைத் தூண்டும் ஒரு நபர். மேலும், நீங்கள் விரும்பும் மற்றும் அவரைப் போல இருக்க விரும்பும் நபர் ஒரு முன்மாதிரி. இது தவிர, ஒரு பிரபலமானவர் முதல் அரசியல்வாதி வரை உங்கள் குடும்ப உறுப்பினர் வரை எவரும் முன்மாதிரியாக இருக்கலாம். பங்கு மாதிரி கட்டுரை என் பங்கு மாதிரி இந்தியாவின் ஏவுகணை நாயகன் டாக்டர் ஏ.பி.ஜே. அப்துல் கலாம் எனது முன்மாதிரி. அவர் என் முன்மாதிரி என்பதால் அல்ல

Last Update: 2021-06-03
Usage Frequency: 1
Quality:

Reference: Anonymous

English

sample written program for industrial safety 1 industrial safety program the following safety policy is provided only as a guide to assist employers and employees in complying with the requirements of 29 cfr 1910 and 1926, as well as to provide other helpful information. it is not intended to supersede the requirements of the standards. an employer should review the standards for particular requirements which are applicable to their individual situation and make adjustments to this program that are specific to their company. an employer will need to add information relevant to their particular facility in order to develop an effective, comprehensive program. 2 industrial safety program for (company name) table of contents topic safety & health policy statement safety & health goals new employee orientation safety & training employee responsibilities accident investigation/reporting personal protective equipment safety rules safety committee emergency action plan safety discipline employee confirmation 3 safety & health policy statement xyz manufacturing company believes that no job or task is more important than worker health and safety. if a job represents a potential safety or health threat, every effort will be made to plan a safe way to complete the task in a safe manner. every procedure must be a safe procedure. shortcuts in safe procedures by management and all other associates will not be tolerated. if a worker observes any unsafe or unprotected exposure, which may pose a potential threat to their safety & health, he or she must inform management immediately. if a job can not be done safely…………..it will not be done. every employee is entitled to a safe and healthful place in which to work. _______________________ president 4 safety & health goals the following goals have been established for xyz manufacturing company: (1) provide workers with a safe work environment. (2) conduct routine/regular workplace inspections. (3) provide personal protective equipment. (4) develop and implement safe work procedures and rules. (5) provide on-going safety training (6) enforce safety rules and appropriate discipline. (7) provide on-going property conservation practices. 5 new employee orientation all new employees must attend our safety orientation session prior to starting work within their assigned area. this session will be conducted under the direction of the safety director and in coordination with human resources. upon completion of the safety orientation session, each new employee will be required to acknowledge that they have received, understand, and will abide by the xyz company safety program. all participants must sign a statement verifying that they have completed the session. this report will be filed in the employee’s personnel file. the following topics will be covered in the safety orientation session:  company history  safety program/policy & work rules  responsibilities  safety education/training  safety audit/inspections  accident reporting/investigation requirements  first aid & bloodborne pathogens  personal protective equipment  tool & equipment use  material handling  lockout-tagout  machine guarding  mvr requirements  hazard communication  emergency action  return-to-work & light duty assignments all new hires will be provided an opportunity to ask any question that pertains to their job duties and employment at xyz manufacturing company. 6 safety & training all in-house safety & training sessions will be coordinated by (name of safety director). foremen and assistant foremen are required to be trained in accident investigation procedures by the safety director. operators of forklift trucks are to be trained in-house in accordance with federal/state requirements. operators must attend classroom instruction as well as “behind the wheel training”. all employees who work with, or are exposed to, hazardous chemicals are to be trained in hazard communication, in accordance with federal and state regulations. all employees who don respirators are to be trained in accordance with federal and state regulations. those individuals who don respirators are required to have annual physicals. machine operators and maintenance personnel are to be trained in lockout/tagout procedures. individual locks/keys will be assigned to those individuals participating in the loto program. all employees who don personal protective equipment (ppe) will be trained in the proper use of such equipment. first-aid training and bloodborne pathogen (bbp) training will be conducted by (name of hospital) and the local chapter of the american red cross. machine/equipment operators are to be trained in-house. emphasis is to be placed on point of operation guarding. no employee is allowed to operate a machine unless it is properly guarded. employees who operate company vehicles are required to participate in an in-house defensive driving program. 7 all production, shipping, and warehouse employees are required to attend a 4 hour in-house safety training session on an annual basis. this partial day session is held each january in the conference room. the safety director will decide the topic material; however each annual session is to place emphasis on material handling and machine guarding. all employees, at time of hire, are to be trained in emergency action and proper evacuation of building in case of an emergency. each employee is to be given instruction/training on where to exit and where to locate in the event of an emergency. foremen and assistant foremen are to meet with the safety director on a quarterly basis to discuss training needs and goals. 8 employee responsibilities each employee is responsible to follow established polices and procedures. regular attendance is required of all. following directions is critical. responsibility does not end with just taking care of you. unsafe working conditions and acts must be reported to management. it is the responsibility of each employee to work in a professional and safe manner. 9 accident investigation/reporting all injuries/illnesses must be reported to management as soon as possible. it is the policy of xyz manufacturing company to have all injuries/illnesses investigated by foremen or assistant foremen within 24 hours of incident. a formal accident investigation form (available from the safety director) must be forwarded to the safety director as soon as possible. it is important that all incidents be reported, no matter how slight. any property/liability loss claim must also be reported to management as soon as possible. the safety director will conduct a loss investigation of all property/liability claims. 10 personal protective equipment personal protective equipment (ppe) includes all clothing and accessories designed to protect against workplace hazards. in some situations the only available protection for employees will be the use of ppe and often in emergencies, ppe will be required for the safety of the workers. as required by federal and state regulations, personal protective equipment is essential for the protection of eyes, ears, face and other body parts when working around hazardous machinery and equipment. all ppe must meet established standards (ansi, niosh, osha, etc). all personal protective equipment (ppe) is provided by xyz manufacturing company. employees are not allowed to provide their own ppe unless authorized by the safety director. as a general rule, only company provided ppe is allowed. hazard assessments have been completed throughout the production and warehouse areas of xyz manufacturing company. ppe is required in the following areas: warehouse all employees and visitors are required to wear approved hard hats and eye protection. steel-toed shoes/boots required of warehouse workers. welding shop all employees and visitors are required to wear approved eye protection. approved hard hats required of all welders. approved hearing protection required of all welders. welders are also required to don approved ppe in the form of goggles, helmet, leather coat, apron, steel-toed work boot, gloves, no cuff pants and other 11 equipment as deemed necessary by the safety director. mechanical ventilation is required at all welding stations. paint shop all employees and visitors are required to wear approved eye protection. spray painters are required to wear company provided work clothing (disposable shirt/pants). approved respirators are required during those times when spray painting, mixing, or clean-up is taking place. steel-toed boots/shoes required of paint sprayers. all spray painting is to be conducted within the paint spray booth. mechanical ventilation system is to be in operation when spray painting takes place. general production areas approved eye protection required of all who enter shop. visitor glasses (eye protection) are available in main office as well as next to loading dock door and warehouse entrance. xyz manufacturing company will reimburse employee (maximum - $100) each 24 months for the purchase of approved steel-toed boot/shoe. xyz manufacturing company will provide prescription eye wear (approved safety eye protection) for those individuals requesting same. see safety director for additional information. 12 safety rules all safety rules must be obeyed. failure to do so will result in strict disciplinary action.  all injuries must be reported as soon as possible.  no horseplay, alcohol, or drugs allowed on premises.  no alcohol usage allowed during lunch break.  ppe must be worn as prescribed by management.  all tools/equipment must be maintained in good condition.  only appropriate tools shall be used for specific jobs.  all guards must be kept in place.  no spliced electrical cords/wiring allowed.  only authorized personnel can operate forklift vehicles.  smoking allowed only in lunchroom.  seat belt use required of all drivers/passengers.  all osha safety standards will be followed for job processes requiring respiratory protection. *see separate written respiratory protection program.  all osha safety standards concerning lockout/tagout of energized equipment will be followed. *see separate written lockout/tagout program.  all osha safety standards concerning hazard communications will be followed. *see separate written hazard communications program. 13  all osha safety standards concerning forklift safety will be followed. *see separate written forklift safety program. *these sample written safety programs can be found on the frankenmuth safety services website. they can be downloaded as a pdf or microsoft word file. 14 safety committee the primary purpose of the safety committee is to promote safety awareness and reduce the potential for injury/loss throughout xyz manufacturing company. the safety committee is to be chaired by the safety director and include representatives from each department (total number of committee members not to exceed five individuals). members can be volunteers or appointed. membership is limited to two terms (1 year each) during any four year period. meetings are to be scheduled, when possible, for the same day each month (2nd tuesday of each month – 2:00 p.m.). all meetings are to take place in the conference room. each meeting should have a set agenda and minutes of each meeting recorded. a copy of the minutes shall be forwarded to the executive vice-president within 48 hours of meeting. each safety committee meeting shall include a review of the prior month’s minutes as well as a review of the prior month’s injury/illness log and investigations of losses/claims. past injuries/claims/losses need to be reviewed for any patterns or trends. general functions of the safety committee can include: (1) identifying workplace hazards (2) enforcement of safety rules (3) measuring safety performance (4) reducing frequency/severity of injuries (5) creating safety policies (6) developing and monitoring safety programs specific tasks of the safety committee can include: (1) conducting self-inspections of the workplace 15 (2) review employee reports of hazards (3) assist in safety training (4) creating safety incentive programs (5) publish/distribute safety newsletter (6) inspect ppe (7) post safety posters/slogans on bulletin board (8) identify light duty jobs the safety committee of xyz manufacturing company was formed to promote safety throughout our organization. the benefits of a safety committee are numerous and xyz manufacturing believes that this is a forum for problem solving. the safety committee has an open door policy and welcomes suggestions. 16 emergency action plan the emergency action plan (eap) is in place to ensure employee safety from fire and other emergency. at the time of an emergency, all employees should know what type of evacuation is necessary and what their role is in carrying out the plan. in some emergencies total and immediate evacuation will be necessary. in other emergencies only partial evacuation may be necessary. when a fire is detected it is necessary that the fire alarm pull station be activated as soon as possible. the fire alarm will notify the emergency response team who will perform assigned duties. the activation of the alarm will also notify the local fire department. in the event of bomb threat, toxic chemical release, hazardous weather, or other emergencies – notification will be made over the public address system. in the event of fire, bomb threat, or toxic chemical release; employees are to proceed to the nearest available and safe exit and leave the building as soon as possible. floor plans (maps) and exits have been posted in each department. it is of critical importance that all employees and visitors are accounted for. shop and warehouse employees are to meet in the __________ parking lot on _______ street. secondary location is the intersection of _________ and ________ street. office employees are to meet in the __________ parking lot on __________ street. secondary location is the intersection of __________ and __________ street. 17 in the event of weather emergencies all employees (and visitors) are to evacuate their assigned area and report to the lower level bomb shelter. again, it is of critical importance that all employees and visitors are accounted for. supervisors within each area shall take a head count at the designated meeting areas. it is the responsibility of each supervisor to advise fire and police departments of any missing persons. there will be evacuation training each april and october (full evacuation to designated areas). 18 safety discipline management personnel at all levels are responsible for taking action when a violation is observed. if a violation is observed, they must take action immediately to correct the violation and enforce this disciplinary policy. employees who fail to follow safety rules and regulations established to protect them and their fellow employees endanger themselves and others. visitors and contractors on site are also required to abide by the safety rules and regulations. the following procedures will be followed when a violation is observed: first violation* verbal warning with written confirmation in personnel file. second violation* written warning and ½ day suspension (written confirmation in personnel file). third violation* written warning and one week suspension (written confirmation in personnel file). fourth violation* termination (written confirmation in personnel file). 19 *as warranted by type of violation (use of drugs/alcohol, criminal activity, etc.) termination of employment may take place after any such violation. employee confirmation of safety program this is to certify that i, ___________________________________, have read and will observe the safety practices as outlined in this booklet and other rules presented to me during my employment with xyz manufacturing company. i understand that the safety practices listed are not the only procedures and/or rules that i will be called upon to follow. i also understand that it is a requirement of my employment that any injury/illness be reported to my supervisor immediately. signed _________________________________________ witness ________________________________________ date _______________________ this form to be filed in personnel file the information and suggestions contained in this material have been developed from sources believed to be reliable. however, frankenmuth accepts no legal responsibility for the correctness or completeness of this material, or its application to specific factual situations.

Tamil

தமிழ் தொழில்துறை பாதுகாப்பு பற்றிய கட்டுரை

Last Update: 2017-03-05
Usage Frequency: 1
Quality:

Reference: Anonymous
Warning: Contains invisible HTML formatting

English

sample written program for industrial safety 1 industrial safety program the following safety policy is provided only as a guide to assist employers and employees in complying with the requirements of 29 cfr 1910 and 1926, as well as to provide other helpful information. it is not intended to supersede the requirements of the standards. an employer should review the standards for particular requirements which are applicable to their individual situation and make adjustments to this program that are specific to their company. an employer will need to add information relevant to their particular facility in order to develop an effective, comprehensive program. 2 industrial safety program for (company name) table of contents topic safety & health policy statement safety & health goals new employee orientation safety & training employee responsibilities accident investigation/reporting personal protective equipment safety rules safety committee emergency action plan safety discipline employee confirmation 3 safety & health policy statement xyz manufacturing company believes that no job or task is more important than worker health and safety. if a job represents a potential safety or health threat, every effort will be made to plan a safe way to complete the task in a safe manner. every procedure must be a safe procedure. shortcuts in safe procedures by management and all other associates will not be tolerated. if a worker observes any unsafe or unprotected exposure, which may pose a potential threat to their safety & health, he or she must inform management immediately. if a job can not be done safely…………..it will not be done. every employee is entitled to a safe and healthful place in which to work. _______________________ president 4 safety & health goals the following goals have been established for xyz manufacturing company: (1) provide workers with a safe work environment. (2) conduct routine/regular workplace inspections. (3) provide personal protective equipment. (4) develop and implement safe work procedures and rules. (5) provide on-going safety training (6) enforce safety rules and appropriate discipline. (7) provide on-going property conservation practices. 5 new employee orientation all new employees must attend our safety orientation session prior to starting work within their assigned area. this session will be conducted under the direction of the safety director and in coordination with human resources. upon completion of the safety orientation session, each new employee will be required to acknowledge that they have received, understand, and will abide by the xyz company safety program. all participants must sign a statement verifying that they have completed the session. this report will be filed in the employee’s personnel file. the following topics will be covered in the safety orientation session:  company history  safety program/policy & work rules  responsibilities  safety education/training  safety audit/inspections  accident reporting/investigation requirements  first aid & bloodborne pathogens  personal protective equipment  tool & equipment use  material handling  lockout-tagout  machine guarding  mvr requirements  hazard communication  emergency action  return-to-work & light duty assignments all new hires will be provided an opportunity to ask any question that pertains to their job duties and employment at xyz manufacturing company. 6 safety & training all in-house safety & training sessions will be coordinated by (name of safety director). foremen and assistant foremen are required to be trained in accident investigation procedures by the safety director. operators of forklift trucks are to be trained in-house in accordance with federal/state requirements. operators must attend classroom instruction as well as “behind the wheel training”. all employees who work with, or are exposed to, hazardous chemicals are to be trained in hazard communication, in accordance with federal and state regulations. all employees who don respirators are to be trained in accordance with federal and state regulations. those individuals who don respirators are required to have annual physicals. machine operators and maintenance personnel are to be trained in lockout/tagout procedures. individual locks/keys will be assigned to those individuals participating in the loto program. all employees who don personal protective equipment (ppe) will be trained in the proper use of such equipment. first-aid training and bloodborne pathogen (bbp) training will be conducted by (name of hospital) and the local chapter of the american red cross. machine/equipment operators are to be trained in-house. emphasis is to be placed on point of operation guarding. no employee is allowed to operate a machine unless it is properly guarded. employees who operate company vehicles are required to participate in an in-house defensive driving program. 7 all production, shipping, and warehouse employees are required to attend a 4 hour in-house safety training session on an annual basis. this partial day session is held each january in the conference room. the safety director will decide the topic material; however each annual session is to place emphasis on material handling and machine guarding. all employees, at time of hire, are to be trained in emergency action and proper evacuation of building in case of an emergency. each employee is to be given instruction/training on where to exit and where to locate in the event of an emergency. foremen and assistant foremen are to meet with the safety director on a quarterly basis to discuss training needs and goals. 8 employee responsibilities each employee is responsible to follow established polices and procedures. regular attendance is required of all. following directions is critical. responsibility does not end with just taking care of you. unsafe working conditions and acts must be reported to management. it is the responsibility of each employee to work in a professional and safe manner. 9 accident investigation/reporting all injuries/illnesses must be reported to management as soon as possible. it is the policy of xyz manufacturing company to have all injuries/illnesses investigated by foremen or assistant foremen within 24 hours of incident. a formal accident investigation form (available from the safety director) must be forwarded to the safety director as soon as possible. it is important that all incidents be reported, no matter how slight. any property/liability loss claim must also be reported to management as soon as possible. the safety director will conduct a loss investigation of all property/liability claims. 10 personal protective equipment personal protective equipment (ppe) includes all clothing and accessories designed to protect against workplace hazards. in some situations the only available protection for employees will be the use of ppe and often in emergencies, ppe will be required for the safety of the workers. as required by federal and state regulations, personal protective equipment is essential for the protection of eyes, ears, face and other body parts when working around hazardous machinery and equipment. all ppe must meet established standards (ansi, niosh, osha, etc). all personal protective equipment (ppe) is provided by xyz manufacturing company. employees are not allowed to provide their own ppe unless authorized by the safety director. as a general rule, only company provided ppe is allowed. hazard assessments have been completed throughout the production and warehouse areas of xyz manufacturing company. ppe is required in the following areas: warehouse all employees and visitors are required to wear approved hard hats and eye protection. steel-toed shoes/boots required of warehouse workers. welding shop all employees and visitors are required to wear approved eye protection. approved hard hats required of all welders. approved hearing protection required of all welders. welders are also required to don approved ppe in the form of goggles, helmet, leather coat, apron, steel-toed work boot, gloves, no cuff pants and other 11 equipment as deemed necessary by the safety director. mechanical ventilation is required at all welding stations. paint shop all employees and visitors are required to wear approved eye protection. spray painters are required to wear company provided work clothing (disposable shirt/pants). approved respirators are required during those times when spray painting, mixing, or clean-up is taking place. steel-toed boots/shoes required of paint sprayers. all spray painting is to be conducted within the paint spray booth. mechanical ventilation system is to be in operation when spray painting takes place. general production areas approved eye protection required of all who enter shop. visitor glasses (eye protection) are available in main office as well as next to loading dock door and warehouse entrance. xyz manufacturing company will reimburse employee (maximum - $100) each 24 months for the purchase of approved steel-toed boot/shoe. xyz manufacturing company will provide prescription eye wear (approved safety eye protection) for those individuals requesting same. see safety director for additional information. 12 safety rules all safety rules must be obeyed. failure to do so will result in strict disciplinary action.  all injuries must be reported as soon as possible.  no horseplay, alcohol, or drugs allowed on premises.  no alcohol usage allowed during lunch break.  ppe must be worn as prescribed by management.  all tools/equipment must be maintained in good condition.  only appropriate tools shall be used for specific jobs.  all guards must be kept in place.  no spliced electrical cords/wiring allowed.  only authorized personnel can operate forklift vehicles.  smoking allowed only in lunchroom.  seat belt use required of all drivers/passengers.  all osha safety standards will be followed for job processes requiring respiratory protection. *see separate written respiratory protection program.  all osha safety standards concerning lockout/tagout of energized equipment will be followed. *see separate written lockout/tagout program.  all osha safety standards concerning hazard communications will be followed. *see separate written hazard communications program. 13  all osha safety standards concerning forklift safety will be followed. *see separate written forklift safety program. *these sample written safety programs can be found on the frankenmuth safety services website. they can be downloaded as a pdf or microsoft word file. 14 safety committee the primary purpose of the safety committee is to promote safety awareness and reduce the potential for injury/loss throughout xyz manufacturing company. the safety committee is to be chaired by the safety director and include representatives from each department (total number of committee members not to exceed five individuals). members can be volunteers or appointed. membership is limited to two terms (1 year each) during any four year period. meetings are to be scheduled, when possible, for the same day each month (2nd tuesday of each month – 2:00 p.m.). all meetings are to take place in the conference room. each meeting should have a set agenda and minutes of each meeting recorded. a copy of the minutes shall be forwarded to the executive vice-president within 48 hours of meeting. each safety committee meeting shall include a review of the prior month’s minutes as well as a review of the prior month’s injury/illness log and investigations of losses/claims. past injuries/claims/losses need to be reviewed for any patterns or trends. general functions of the safety committee can include: (1) identifying workplace hazards (2) enforcement of safety rules (3) measuring safety performance (4) reducing frequency/severity of injuries (5) creating safety policies (6) developing and monitoring safety programs specific tasks of the safety committee can include: (1) conducting self-inspections of the workplace 15 (2) review employee reports of hazards (3) assist in safety training (4) creating safety incentive programs (5) publish/distribute safety newsletter (6) inspect ppe (7) post safety posters/slogans on bulletin board (8) identify light duty jobs the safety committee of xyz manufacturing company was formed to promote safety throughout our organization. the benefits of a safety committee are numerous and xyz manufacturing believes that this is a forum for problem solving. the safety committee has an open door policy and welcomes suggestions. 16 emergency action plan the emergency action plan (eap) is in place to ensure employee safety from fire and other emergency. at the time of an emergency, all employees should know what type of evacuation is necessary and what their role is in carrying out the plan. in some emergencies total and immediate evacuation will be necessary. in other emergencies only partial evacuation may be necessary. when a fire is detected it is necessary that the fire alarm pull station be activated as soon as possible. the fire alarm will notify the emergency response team who will perform assigned duties. the activation of the alarm will also notify the local fire department. in the event of bomb threat, toxic chemical release, hazardous weather, or other emergencies – notification will be made over the public address system. in the event of fire, bomb threat, or toxic chemical release; employees are to proceed to the nearest available and safe exit and leave the building as soon as possible. floor plans (maps) and exits have been posted in each department. it is of critical importance that all employees and visitors are accounted for. shop and warehouse employees are to meet in the __________ parking lot on _______ street. secondary location is the intersection of _________ and ________ street. office employees are to meet in the __________ parking lot on __________ street. secondary location is the intersection of __________ and __________ street. 17 in the event of weather emergencies all employees (and visitors) are to evacuate their assigned area and report to the lower level bomb shelter. again, it is of critical importance that all employees and visitors are accounted for. supervisors within each area shall take a head count at the designated meeting areas. it is the responsibility of each supervisor to advise fire and police departments of any missing persons. there will be evacuation training each april and october (full evacuation to designated areas). 18 safety discipline management personnel at all levels are responsible for taking action when a violation is observed. if a violation is observed, they must take action immediately to correct the violation and enforce this disciplinary policy. employees who fail to follow safety rules and regulations established to protect them and their fellow employees endanger themselves and others. visitors and contractors on site are also required to abide by the safety rules and regulations. the following procedures will be followed when a violation is observed: first violation* verbal warning with written confirmation in personnel file. second violation* written warning and ½ day suspension (written confirmation in personnel file). third violation* written warning and one week suspension (written confirmation in personnel file). fourth violation* termination (written confirmation in personnel file). 19 *as warranted by type of violation (use of drugs/alcohol, criminal activity, etc.) termination of employment may take place after any such violation. employee confirmation of safety program this is to certify that i, ___________________________________, have read and will observe the safety practices as outlined in this booklet and other rules presented to me during my employment with xyz manufacturing company. i understand that the safety practices listed are not the only procedures and/or rules that i will be called upon to follow. i also understand that it is a requirement of my employment that any injury/illness be reported to my supervisor immediately. signed _________________________________________ witness ________________________________________ date _______________________ this form to be filed in personnel file the information and suggestions contained in this material have been developed from sources believed to be reliable. however, frankenmuth accepts no legal responsibility for the correctness or completeness of this material, or its application to specific factual situations.

Tamil

தமிழ் தொழில்துறை பாதுகாப்பு பற்றிய கட்டுரை

Last Update: 2017-03-05
Usage Frequency: 1
Quality:

Reference: Anonymous
Warning: Contains invisible HTML formatting

English

sample written program for industrial safety 1 industrial safety program the following safety policy is provided only as a guide to assist employers and employees in complying with the requirements of 29 cfr 1910 and 1926, as well as to provide other helpful information. it is not intended to supersede the requirements of the standards. an employer should review the standards for particular requirements which are applicable to their individual situation and make adjustments to this program that are specific to their company. an employer will need to add information relevant to their particular facility in order to develop an effective, comprehensive program. 2 industrial safety program for (company name) table of contents topic safety & health policy statement safety & health goals new employee orientation safety & training employee responsibilities accident investigation/reporting personal protective equipment safety rules safety committee emergency action plan safety discipline employee confirmation 3 safety & health policy statement xyz manufacturing company believes that no job or task is more important than worker health and safety. if a job represents a potential safety or health threat, every effort will be made to plan a safe way to complete the task in a safe manner. every procedure must be a safe procedure. shortcuts in safe procedures by management and all other associates will not be tolerated. if a worker observes any unsafe or unprotected exposure, which may pose a potential threat to their safety & health, he or she must inform management immediately. if a job can not be done safely…………..it will not be done. every employee is entitled to a safe and healthful place in which to work. _______________________ president 4 safety & health goals the following goals have been established for xyz manufacturing company: (1) provide workers with a safe work environment. (2) conduct routine/regular workplace inspections. (3) provide personal protective equipment. (4) develop and implement safe work procedures and rules. (5) provide on-going safety training (6) enforce safety rules and appropriate discipline. (7) provide on-going property conservation practices. 5 new employee orientation all new employees must attend our safety orientation session prior to starting work within their assigned area. this session will be conducted under the direction of the safety director and in coordination with human resources. upon completion of the safety orientation session, each new employee will be required to acknowledge that they have received, understand, and will abide by the xyz company safety program. all participants must sign a statement verifying that they have completed the session. this report will be filed in the employee’s personnel file. the following topics will be covered in the safety orientation session:  company history  safety program/policy & work rules  responsibilities  safety education/training  safety audit/inspections  accident reporting/investigation requirements  first aid & bloodborne pathogens  personal protective equipment  tool & equipment use  material handling  lockout-tagout  machine guarding  mvr requirements  hazard communication  emergency action  return-to-work & light duty assignments all new hires will be provided an opportunity to ask any question that pertains to their job duties and employment at xyz manufacturing company. 6 safety & training all in-house safety & training sessions will be coordinated by (name of safety director). foremen and assistant foremen are required to be trained in accident investigation procedures by the safety director. operators of forklift trucks are to be trained in-house in accordance with federal/state requirements. operators must attend classroom instruction as well as “behind the wheel training”. all employees who work with, or are exposed to, hazardous chemicals are to be trained in hazard communication, in accordance with federal and state regulations. all employees who don respirators are to be trained in accordance with federal and state regulations. those individuals who don respirators are required to have annual physicals. machine operators and maintenance personnel are to be trained in lockout/tagout procedures. individual locks/keys will be assigned to those individuals participating in the loto program. all employees who don personal protective equipment (ppe) will be trained in the proper use of such equipment. first-aid training and bloodborne pathogen (bbp) training will be conducted by (name of hospital) and the local chapter of the american red cross. machine/equipment operators are to be trained in-house. emphasis is to be placed on point of operation guarding. no employee is allowed to operate a machine unless it is properly guarded. employees who operate company vehicles are required to participate in an in-house defensive driving program. 7 all production, shipping, and warehouse employees are required to attend a 4 hour in-house safety training session on an annual basis. this partial day session is held each january in the conference room. the safety director will decide the topic material; however each annual session is to place emphasis on material handling and machine guarding. all employees, at time of hire, are to be trained in emergency action and proper evacuation of building in case of an emergency. each employee is to be given instruction/training on where to exit and where to locate in the event of an emergency. foremen and assistant foremen are to meet with the safety director on a quarterly basis to discuss training needs and goals. 8 employee responsibilities each employee is responsible to follow established polices and procedures. regular attendance is required of all. following directions is critical. responsibility does not end with just taking care of you. unsafe working conditions and acts must be reported to management. it is the responsibility of each employee to work in a professional and safe manner. 9 accident investigation/reporting all injuries/illnesses must be reported to management as soon as possible. it is the policy of xyz manufacturing company to have all injuries/illnesses investigated by foremen or assistant foremen within 24 hours of incident. a formal accident investigation form (available from the safety director) must be forwarded to the safety director as soon as possible. it is important that all incidents be reported, no matter how slight. any property/liability loss claim must also be reported to management as soon as possible. the safety director will conduct a loss investigation of all property/liability claims. 10 personal protective equipment personal protective equipment (ppe) includes all clothing and accessories designed to protect against workplace hazards. in some situations the only available protection for employees will be the use of ppe and often in emergencies, ppe will be required for the safety of the workers. as required by federal and state regulations, personal protective equipment is essential for the protection of eyes, ears, face and other body parts when working around hazardous machinery and equipment. all ppe must meet established standards (ansi, niosh, osha, etc). all personal protective equipment (ppe) is provided by xyz manufacturing company. employees are not allowed to provide their own ppe unless authorized by the safety director. as a general rule, only company provided ppe is allowed. hazard assessments have been completed throughout the production and warehouse areas of xyz manufacturing company. ppe is required in the following areas: warehouse all employees and visitors are required to wear approved hard hats and eye protection. steel-toed shoes/boots required of warehouse workers. welding shop all employees and visitors are required to wear approved eye protection. approved hard hats required of all welders. approved hearing protection required of all welders. welders are also required to don approved ppe in the form of goggles, helmet, leather coat, apron, steel-toed work boot, gloves, no cuff pants and other 11 equipment as deemed necessary by the safety director. mechanical ventilation is required at all welding stations. paint shop all employees and visitors are required to wear approved eye protection. spray painters are required to wear company provided work clothing (disposable shirt/pants). approved respirators are required during those times when spray painting, mixing, or clean-up is taking place. steel-toed boots/shoes required of paint sprayers. all spray painting is to be conducted within the paint spray booth. mechanical ventilation system is to be in operation when spray painting takes place. general production areas approved eye protection required of all who enter shop. visitor glasses (eye protection) are available in main office as well as next to loading dock door and warehouse entrance. xyz manufacturing company will reimburse employee (maximum - $100) each 24 months for the purchase of approved steel-toed boot/shoe. xyz manufacturing company will provide prescription eye wear (approved safety eye protection) for those individuals requesting same. see safety director for additional information. 12 safety rules all safety rules must be obeyed. failure to do so will result in strict disciplinary action.  all injuries must be reported as soon as possible.  no horseplay, alcohol, or drugs allowed on premises.  no alcohol usage allowed during lunch break.  ppe must be worn as prescribed by management.  all tools/equipment must be maintained in good condition.  only appropriate tools shall be used for specific jobs.  all guards must be kept in place.  no spliced electrical cords/wiring allowed.  only authorized personnel can operate forklift vehicles.  smoking allowed only in lunchroom.  seat belt use required of all drivers/passengers.  all osha safety standards will be followed for job processes requiring respiratory protection. *see separate written respiratory protection program.  all osha safety standards concerning lockout/tagout of energized equipment will be followed. *see separate written lockout/tagout program.  all osha safety standards concerning hazard communications will be followed. *see separate written hazard communications program. 13  all osha safety standards concerning forklift safety will be followed. *see separate written forklift safety program. *these sample written safety programs can be found on the frankenmuth safety services website. they can be downloaded as a pdf or microsoft word file. 14 safety committee the primary purpose of the safety committee is to promote safety awareness and reduce the potential for injury/loss throughout xyz manufacturing company. the safety committee is to be chaired by the safety director and include representatives from each department (total number of committee members not to exceed five individuals). members can be volunteers or appointed. membership is limited to two terms (1 year each) during any four year period. meetings are to be scheduled, when possible, for the same day each month (2nd tuesday of each month – 2:00 p.m.). all meetings are to take place in the conference room. each meeting should have a set agenda and minutes of each meeting recorded. a copy of the minutes shall be forwarded to the executive vice-president within 48 hours of meeting. each safety committee meeting shall include a review of the prior month’s minutes as well as a review of the prior month’s injury/illness log and investigations of losses/claims. past injuries/claims/losses need to be reviewed for any patterns or trends. general functions of the safety committee can include: (1) identifying workplace hazards (2) enforcement of safety rules (3) measuring safety performance (4) reducing frequency/severity of injuries (5) creating safety policies (6) developing and monitoring safety programs specific tasks of the safety committee can include: (1) conducting self-inspections of the workplace 15 (2) review employee reports of hazards (3) assist in safety training (4) creating safety incentive programs (5) publish/distribute safety newsletter (6) inspect ppe (7) post safety posters/slogans on bulletin board (8) identify light duty jobs the safety committee of xyz manufacturing company was formed to promote safety throughout our organization. the benefits of a safety committee are numerous and xyz manufacturing believes that this is a forum for problem solving. the safety committee has an open door policy and welcomes suggestions. 16 emergency action plan the emergency action plan (eap) is in place to ensure employee safety from fire and other emergency. at the time of an emergency, all employees should know what type of evacuation is necessary and what their role is in carrying out the plan. in some emergencies total and immediate evacuation will be necessary. in other emergencies only partial evacuation may be necessary. when a fire is detected it is necessary that the fire alarm pull station be activated as soon as possible. the fire alarm will notify the emergency response team who will perform assigned duties. the activation of the alarm will also notify the local fire department. in the event of bomb threat, toxic chemical release, hazardous weather, or other emergencies – notification will be made over the public address system. in the event of fire, bomb threat, or toxic chemical release; employees are to proceed to the nearest available and safe exit and leave the building as soon as possible. floor plans (maps) and exits have been posted in each department. it is of critical importance that all employees and visitors are accounted for. shop and warehouse employees are to meet in the __________ parking lot on _______ street. secondary location is the intersection of _________ and ________ street. office employees are to meet in the __________ parking lot on __________ street. secondary location is the intersection of __________ and __________ street. 17 in the event of weather emergencies all employees (and visitors) are to evacuate their assigned area and report to the lower level bomb shelter. again, it is of critical importance that all employees and visitors are accounted for. supervisors within each area shall take a head count at the designated meeting areas. it is the responsibility of each supervisor to advise fire and police departments of any missing persons. there will be evacuation training each april and october (full evacuation to designated areas). 18 safety discipline management personnel at all levels are responsible for taking action when a violation is observed. if a violation is observed, they must take action immediately to correct the violation and enforce this disciplinary policy. employees who fail to follow safety rules and regulations established to protect them and their fellow employees endanger themselves and others. visitors and contractors on site are also required to abide by the safety rules and regulations. the following procedures will be followed when a violation is observed: first violation* verbal warning with written confirmation in personnel file. second violation* written warning and ½ day suspension (written confirmation in personnel file). third violation* written warning and one week suspension (written confirmation in personnel file). fourth violation* termination (written confirmation in personnel file). 19 *as warranted by type of violation (use of drugs/alcohol, criminal activity, etc.) termination of employment may take place after any such violation. employee confirmation of safety program this is to certify that i, ___________________________________, have read and will observe the safety practices as outlined in this booklet and other rules presented to me during my employment with xyz manufacturing company. i understand that the safety practices listed are not the only procedures and/or rules that i will be called upon to follow. i also understand that it is a requirement of my employment that any injury/illness be reported to my supervisor immediately. signed _________________________________________ witness ________________________________________ date _______________________ this form to be filed in personnel file the information and suggestions contained in this material have been developed from sources believed to be reliable. however, frankenmuth accepts no legal responsibility for the correctness or completeness of this material, or its application to specific factual situations.

Tamil

தமிழ் தொழில்துறை பாதுகாப்பு பற்றிய கட்டுரை

Last Update: 2017-03-05
Usage Frequency: 1
Quality:

Reference: Anonymous
Warning: Contains invisible HTML formatting

English

sample written program for industrial safety 1 industrial safety program the following safety policy is provided only as a guide to assist employers and employees in complying with the requirements of 29 cfr 1910 and 1926, as well as to provide other helpful information. it is not intended to supersede the requirements of the standards. an employer should review the standards for particular requirements which are applicable to their individual situation and make adjustments to this program that are specific to their company. an employer will need to add information relevant to their particular facility in order to develop an effective, comprehensive program. 2 industrial safety program for (company name) table of contents topic safety & health policy statement safety & health goals new employee orientation safety & training employee responsibilities accident investigation/reporting personal protective equipment safety rules safety committee emergency action plan safety discipline employee confirmation 3 safety & health policy statement xyz manufacturing company believes that no job or task is more important than worker health and safety. if a job represents a potential safety or health threat, every effort will be made to plan a safe way to complete the task in a safe manner. every procedure must be a safe procedure. shortcuts in safe procedures by management and all other associates will not be tolerated. if a worker observes any unsafe or unprotected exposure, which may pose a potential threat to their safety & health, he or she must inform management immediately. if a job can not be done safely…………..it will not be done. every employee is entitled to a safe and healthful place in which to work. _______________________ president 4 safety & health goals the following goals have been established for xyz manufacturing company: (1) provide workers with a safe work environment. (2) conduct routine/regular workplace inspections. (3) provide personal protective equipment. (4) develop and implement safe work procedures and rules. (5) provide on-going safety training (6) enforce safety rules and appropriate discipline. (7) provide on-going property conservation practices. 5 new employee orientation all new employees must attend our safety orientation session prior to starting work within their assigned area. this session will be conducted under the direction of the safety director and in coordination with human resources. upon completion of the safety orientation session, each new employee will be required to acknowledge that they have received, understand, and will abide by the xyz company safety program. all participants must sign a statement verifying that they have completed the session. this report will be filed in the employee’s personnel file. the following topics will be covered in the safety orientation session:  company history  safety program/policy & work rules  responsibilities  safety education/training  safety audit/inspections  accident reporting/investigation requirements  first aid & bloodborne pathogens  personal protective equipment  tool & equipment use  material handling  lockout-tagout  machine guarding  mvr requirements  hazard communication  emergency action  return-to-work & light duty assignments all new hires will be provided an opportunity to ask any question that pertains to their job duties and employment at xyz manufacturing company. 6 safety & training all in-house safety & training sessions will be coordinated by (name of safety director). foremen and assistant foremen are required to be trained in accident investigation procedures by the safety director. operators of forklift trucks are to be trained in-house in accordance with federal/state requirements. operators must attend classroom instruction as well as “behind the wheel training”. all employees who work with, or are exposed to, hazardous chemicals are to be trained in hazard communication, in accordance with federal and state regulations. all employees who don respirators are to be trained in accordance with federal and state regulations. those individuals who don respirators are required to have annual physicals. machine operators and maintenance personnel are to be trained in lockout/tagout procedures. individual locks/keys will be assigned to those individuals participating in the loto program. all employees who don personal protective equipment (ppe) will be trained in the proper use of such equipment. first-aid training and bloodborne pathogen (bbp) training will be conducted by (name of hospital) and the local chapter of the american red cross. machine/equipment operators are to be trained in-house. emphasis is to be placed on point of operation guarding. no employee is allowed to operate a machine unless it is properly guarded. employees who operate company vehicles are required to participate in an in-house defensive driving program. 7 all production, shipping, and warehouse employees are required to attend a 4 hour in-house safety training session on an annual basis. this partial day session is held each january in the conference room. the safety director will decide the topic material; however each annual session is to place emphasis on material handling and machine guarding. all employees, at time of hire, are to be trained in emergency action and proper evacuation of building in case of an emergency. each employee is to be given instruction/training on where to exit and where to locate in the event of an emergency. foremen and assistant foremen are to meet with the safety director on a quarterly basis to discuss training needs and goals. 8 employee responsibilities each employee is responsible to follow established polices and procedures. regular attendance is required of all. following directions is critical. responsibility does not end with just taking care of you. unsafe working conditions and acts must be reported to management. it is the responsibility of each employee to work in a professional and safe manner. 9 accident investigation/reporting all injuries/illnesses must be reported to management as soon as possible. it is the policy of xyz manufacturing company to have all injuries/illnesses investigated by foremen or assistant foremen within 24 hours of incident. a formal accident investigation form (available from the safety director) must be forwarded to the safety director as soon as possible. it is important that all incidents be reported, no matter how slight. any property/liability loss claim must also be reported to management as soon as possible. the safety director will conduct a loss investigation of all property/liability claims. 10 personal protective equipment personal protective equipment (ppe) includes all clothing and accessories designed to protect against workplace hazards. in some situations the only available protection for employees will be the use of ppe and often in emergencies, ppe will be required for the safety of the workers. as required by federal and state regulations, personal protective equipment is essential for the protection of eyes, ears, face and other body parts when working around hazardous machinery and equipment. all ppe must meet established standards (ansi, niosh, osha, etc). all personal protective equipment (ppe) is provided by xyz manufacturing company. employees are not allowed to provide their own ppe unless authorized by the safety director. as a general rule, only company provided ppe is allowed. hazard assessments have been completed throughout the production and warehouse areas of xyz manufacturing company. ppe is required in the following areas: warehouse all employees and visitors are required to wear approved hard hats and eye protection. steel-toed shoes/boots required of warehouse workers. welding shop all employees and visitors are required to wear approved eye protection. approved hard hats required of all welders. approved hearing protection required of all welders. welders are also required to don approved ppe in the form of goggles, helmet, leather coat, apron, steel-toed work boot, gloves, no cuff pants and other 11 equipment as deemed necessary by the safety director. mechanical ventilation is required at all welding stations. paint shop all employees and visitors are required to wear approved eye protection. spray painters are required to wear company provided work clothing (disposable shirt/pants). approved respirators are required during those times when spray painting, mixing, or clean-up is taking place. steel-toed boots/shoes required of paint sprayers. all spray painting is to be conducted within the paint spray booth. mechanical ventilation system is to be in operation when spray painting takes place. general production areas approved eye protection required of all who enter shop. visitor glasses (eye protection) are available in main office as well as next to loading dock door and warehouse entrance. xyz manufacturing company will reimburse employee (maximum - $100) each 24 months for the purchase of approved steel-toed boot/shoe. xyz manufacturing company will provide prescription eye wear (approved safety eye protection) for those individuals requesting same. see safety director for additional information. 12 safety rules all safety rules must be obeyed. failure to do so will result in strict disciplinary action.  all injuries must be reported as soon as possible.  no horseplay, alcohol, or drugs allowed on premises.  no alcohol usage allowed during lunch break.  ppe must be worn as prescribed by management.  all tools/equipment must be maintained in good condition.  only appropriate tools shall be used for specific jobs.  all guards must be kept in place.  no spliced electrical cords/wiring allowed.  only authorized personnel can operate forklift vehicles.  smoking allowed only in lunchroom.  seat belt use required of all drivers/passengers.  all osha safety standards will be followed for job processes requiring respiratory protection. *see separate written respiratory protection program.  all osha safety standards concerning lockout/tagout of energized equipment will be followed. *see separate written lockout/tagout program.  all osha safety standards concerning hazard communications will be followed. *see separate written hazard communications program. 13  all osha safety standards concerning forklift safety will be followed. *see separate written forklift safety program. *these sample written safety programs can be found on the frankenmuth safety services website. they can be downloaded as a pdf or microsoft word file. 14 safety committee the primary purpose of the safety committee is to promote safety awareness and reduce the potential for injury/loss throughout xyz manufacturing company. the safety committee is to be chaired by the safety director and include representatives from each department (total number of committee members not to exceed five individuals). members can be volunteers or appointed. membership is limited to two terms (1 year each) during any four year period. meetings are to be scheduled, when possible, for the same day each month (2nd tuesday of each month – 2:00 p.m.). all meetings are to take place in the conference room. each meeting should have a set agenda and minutes of each meeting recorded. a copy of the minutes shall be forwarded to the executive vice-president within 48 hours of meeting. each safety committee meeting shall include a review of the prior month’s minutes as well as a review of the prior month’s injury/illness log and investigations of losses/claims. past injuries/claims/losses need to be reviewed for any patterns or trends. general functions of the safety committee can include: (1) identifying workplace hazards (2) enforcement of safety rules (3) measuring safety performance (4) reducing frequency/severity of injuries (5) creating safety policies (6) developing and monitoring safety programs specific tasks of the safety committee can include: (1) conducting self-inspections of the workplace 15 (2) review employee reports of hazards (3) assist in safety training (4) creating safety incentive programs (5) publish/distribute safety newsletter (6) inspect ppe (7) post safety posters/slogans on bulletin board (8) identify light duty jobs the safety committee of xyz manufacturing company was formed to promote safety throughout our organization. the benefits of a safety committee are numerous and xyz manufacturing believes that this is a forum for problem solving. the safety committee has an open door policy and welcomes suggestions. 16 emergency action plan the emergency action plan (eap) is in place to ensure employee safety from fire and other emergency. at the time of an emergency, all employees should know what type of evacuation is necessary and what their role is in carrying out the plan. in some emergencies total and immediate evacuation will be necessary. in other emergencies only partial evacuation may be necessary. when a fire is detected it is necessary that the fire alarm pull station be activated as soon as possible. the fire alarm will notify the emergency response team who will perform assigned duties. the activation of the alarm will also notify the local fire department. in the event of bomb threat, toxic chemical release, hazardous weather, or other emergencies – notification will be made over the public address system. in the event of fire, bomb threat, or toxic chemical release; employees are to proceed to the nearest available and safe exit and leave the building as soon as possible. floor plans (maps) and exits have been posted in each department. it is of critical importance that all employees and visitors are accounted for. shop and warehouse employees are to meet in the __________ parking lot on _______ street. secondary location is the intersection of _________ and ________ street. office employees are to meet in the __________ parking lot on __________ street. secondary location is the intersection of __________ and __________ street. 17 in the event of weather emergencies all employees (and visitors) are to evacuate their assigned area and report to the lower level bomb shelter. again, it is of critical importance that all employees and visitors are accounted for. supervisors within each area shall take a head count at the designated meeting areas. it is the responsibility of each supervisor to advise fire and police departments of any missing persons. there will be evacuation training each april and october (full evacuation to designated areas). 18 safety discipline management personnel at all levels are responsible for taking action when a violation is observed. if a violation is observed, they must take action immediately to correct the violation and enforce this disciplinary policy. employees who fail to follow safety rules and regulations established to protect them and their fellow employees endanger themselves and others. visitors and contractors on site are also required to abide by the safety rules and regulations. the following procedures will be followed when a violation is observed: first violation* verbal warning with written confirmation in personnel file. second violation* written warning and ½ day suspension (written confirmation in personnel file). third violation* written warning and one week suspension (written confirmation in personnel file). fourth violation* termination (written confirmation in personnel file). 19 *as warranted by type of violation (use of drugs/alcohol, criminal activity, etc.) termination of employment may take place after any such violation. employee confirmation of safety program this is to certify that i, ___________________________________, have read and will observe the safety practices as outlined in this booklet and other rules presented to me during my employment with xyz manufacturing company. i understand that the safety practices listed are not the only procedures and/or rules that i will be called upon to follow. i also understand that it is a requirement of my employment that any injury/illness be reported to my supervisor immediately. signed _________________________________________ witness ________________________________________ date _______________________ this form to be filed in personnel file the information and suggestions contained in this material have been developed from sources believed to be reliable. however, frankenmuth accepts no legal responsibility for the correctness or completeness of this material, or its application to specific factual situations.

Tamil

தமிழ் தொழில்துறை பாதுகாப்பு பற்றிய கட்டுரை

Last Update: 2017-03-05
Usage Frequency: 1
Quality:

Reference: Anonymous
Warning: Contains invisible HTML formatting

English

worship the christian’s highest occupation alfred p. gibbs copyright © 1950 chapter five the meaning of worship: the holy perfume as we further think of the definition of worship, let us now consider: 6. the holy perfume (exodus 30:34-38) this very beautiful picture of worship is given to us as part of god’s revelation to moses in regard to the tabernacle, concerning which he had said: “make me a sanctuary, that i may dwell among them” (exodus 25:18). minute instructions were given regarding the details of its furnishings, and we find god repeatedly saying to moses: “and look that thou make them after their pattern, which was showed thee in the mount” (exodus 25:9; 40:26, 30; 27:8, cp. hebrews 8:5). “and the lord said unto moses, take unto thee sweet spices, stacte, and onycha, and galbanum; these sweet spices with pure frankincense: of each shall there be a like weight: and thou shalt make it a perfume, a confection after the art of the apothecary, tempered together, pure and holy: and thou shalt beat some of it very small, and put of it before the testimony in the tabernacle of the congregation, where i will meet with thee: it shall be unto you most holy. and as for the perfume which thou shalt make, ye shall not make to yourselves according to the composition thereof: it shall be unto thee holy for the lord. whosoever shall make like unto that, to smell thereto, shall even be cut off from his people” (exodus 30:34-38) three things impress themselves on the mind as one reads this passage regarding the holy perfume. (1) the exclusive use of it (verses 37-38) it was reserved solely for use in the worship of god in the sanctuary. god expressly forbade its manufacture for any other purpose. the obvious inference from this is that worship belongs to god alone, and that he will share this honor with none. david, “the sweet psalmist of israel,” by the spirit’s inspiration wrote: “he is thy lord, worship thou him . . . exalt ye the lord our god, and worship at his footstool, for he is holy . . . o come, let us worship and bow down: let us kneel before the lord, our maker” (psalm 45:11; 99:5; 95:6). it will be recalled that the first demand of the law was: “thou shalt have no other gods before me . . . for i, the lord thy god, am a jealous god” (exodus 20:3-5). there is no substitute for spiritual worship. it is the unique right, the sole property, and the exclusive privilege of god himself and he will not tolerate any rival. idolatry, in its essence, is simply that by which man seeks to displace god, or which attempts to relegate him to a position of secondary importance. an idol is anything that a man worships in his heart, to the exclusion of god. it was because of the idolatrous apostasy of israel that god: - set israel aside nationally, - allowed them to go into captivity, - scattered them to the four corners of the earth. (see ii kings 17:7-18; ii chronicles 36:14-17). we do well to pay good heed to the divine dictum: “i am the lord, that is my name, and my glory will i not give to another” (isaiah 42:8). he alone claims the title of, “holy and reverend” (psalm 111:9). there is always the subtle danger of becoming more occupied with: - the visible, than the invisible; - with the temporal, than the eternal; - with an outward and formal ceremony, than an inward and spiritual reality. there can therefore be no substitute for spiritual worship: - however ornate may be the ritual, - or gorgeous the vestments, - or beautiful the building, - or well phrased the prayers, - or smoothly conducted the service. undoubtedly all this has an appeal to the esthetic senses, and is well pleasing to the flesh, for man is naturally religious; but it is not spiritual, and consequently cannot please god. (2) the ingredients that formed it (verses 34-36) four ingredients, compounded in equal proportions, composed this perfume, and each part was necessary to the whole. these ingredients were stacte, onycha, galbanum and frankincense. each of these four things has a typical significance which we shall not dwell on now. let us think of them as four elements which, when compounded together in the heart of the believer, as he sits in the presence of god, causes the perfume of his worship to ascend to the father and the son. the first ingredient is remembrance. it is good for the believer to use his memory to recall what he used to be by nature, and what he now is, by god’s matchless grace. the words of paul to the saints at ephesus are pertinent to this: “wherefore remember that ye being in time past gentiles in the flesh . . . but now, in christ jesus . . . are made nigh” (ephesians 2:11, 13). let each christian call to mind his black past, when he was without god, without christ, without life and without hope. then let him contrast this with his present acceptance in the beloved, together with all the spiritual blessings that are now his present and eternal possession. surely the result of such remembrance will cause him to life his heart in adoration to the one who made this so blessedly actual to his experience. his memory should also be focused on the person and work of the lord jesus himself. the purpose of the lord ’s supper, as indicated by the lord himself is: “this do in remembrance of me.” in view of this, worship will become an essential feature of such a meeting, for worship is kindled upon the fires of remembrance. as david puts it: “while i was musing, the fire burned; then spake i with my tongue” (psalm 39:3). it is memory that enables us to recall the record of his matchless life, as given in the holy scriptures. the christian should therefore concentrate upon: - christ’s wondrous words, - his mighty deeds, - his perfect and holy character, - his absolute obedience to the father’s will, - his infinite grace in going to the cross, - his completed work of redemption accomplished by the sacrifice of himself, - his victorious resurrection, - his glorious ascension, - his present ministry as the great high priest of his people. as he does so, the believer’s heart will warm within him, and his worship shall rise to god as a fragrant perfume. the second ingredient is gratitude. as memory recalls all that god is and has done, the heart responds, even as the strings of a harp break forth into song beneath the skilful hands of a master musician. we have before noted that the gratitude of the believer delights the heart of the father. socrates, the great grecian philosopher, declared that gratitude was the greatest of all the virtues, and ingratitude the basest of all the vices. a study of the great worship hymns indicate how great a part gratitude plays in their composition. hannah burlington beautifully expresses it thus: “the knowing this, that us he loves, hath made our cup run o’er; jesus, thy name our spirit moves, today and evermore.” the “ter stegen” hymns are amongst the finest we have. one of them, by ernst c. homburg, written nearly 300 years ago, is redolent with gratitude: “o lord, from my heart i do thank thee for all thou hast borne in my room, thine agony, dying unsolaced, alone in the darkness of doom, that i, in the glory of heaven, for ever and ever might be -- a thousand, a thousand thanksgivings i bring, blessed saviour, to thee!” the third ingredient is reverence. this is produced as the soul apprehends, in some measure at least: - the greatness of god, - the majesty of his divine character, - the glory of his unique attributes, as displayed in his - omniscience, - omnipotence, - omnipresence - immutability. we are living in an age characterized largely by cynicism, flippancy and lightness regarding divine things. the modern trend is to humanize deity and deify humanity, and that has not aided in man’s concept of god. one has only to read the scriptures to discover that whenever a person was brought consciously into the presence of god, it filled him with a holy awe, humbled him in the dust and produced a deep reverence for god. moses, the great leader of israel, was taught this lesson many times. at god’s first revelation to him at the burning bush, the voice of jehovah said: “draw not nigh hither; put thy shoes from off thy feet, for the place whereon thou standest is holy ground” (exodus 3:5). at god’s revelation to him on the mount, in response to his request to see god’s glory, god gave him a vision of himself. at this august spectacle we read: “moses made haste, and bowed his head towards the earth, and worshipped” (exodus 34:8). isaiah, whose magnificent concept of deity has thrilled the hearts of the people of god for twenty-five centuries, had to lay to heart this essential requirement. in chapter six of his prophecy, he describes the vision he had of the glory of god which completely revolutionized his life. this sight not only filled him with a sense of his own littleness, uncleanness and insufficiency, but indelibly impressed upon him god’s greatness, holiness and power. daniel, “the man of desires,” tells us that when he saw the majestic vision of god: “there remained no strength in me, for my comeliness was turned in me into corruption and i retained no strength” (daniel 10:5-11). we could add others to this list, but these will suffice to indicate how necessary it is that godly reverence accompany all our dealings with divine things. this reverence must always be present if our worship is to be acceptable to the one who is described as “the high and lofty one, who inhabiteth eternity,” and who hath declared: “let all the earth fear the lord: let all the inhabitants of the world stand in awe of him” (psalm 33:8). familiarity with god can never produce contempt, for those who know him best, love and fear him most. the more god impresses the soul with his person, the greater that individual is filled with holy awe as he stands in the presence of him, before whose eyes “all things are open and naked” (hebrews 4:13). it should be obvious that humility of mind, sobriety of manner, and sincerity of spirit are essential to and fitting in the presence of the one who said: “ye shall . . . reverence my sanctuary. i am the lord” (leviticus 19:30). the fourth ingredient is amazement. we have before indicated that worship has, as one of its basic requirements, the element of wonder. he who ceases to wonder, ceases to worship. the hymn writer has put it thus: “i stand amazed in the presence of jesus the nazarene, and wonder how he could love me, a sinner, condemned, unclean! o how wonderful! o how marvelous! and my song shall ever be, o how wonderful! o how marvelous! is my saviour’s love to me!” one of the many titles of deity is “wonderful.” everything about the almighty takes upon itself this character. as the believer thinks of the wonder of his person, his creation, his word, his son, his love, his salvation and of each christian’s blessedness, he is led to exclaim with another: “that thou should love a wretch like me, and be the god thou art, is darkness to my intellect, but sunshine to my heart!” (3) the purpose of it. it was for god’s pleasure and for his glory. these ingredients, equally compounded together, combined to produce a perfume which ascended to god in a fragrant stream and brought great pleasure to him. likewise, when a believer sits in the presence of god, with an equal measure of remembrance, gratitude, reverence and amazement well compounded in his heart, there will undoubtedly rise, from the censer of his soul, a silver stream of humble, reverent, sincere and adoring worship to his god and father, and to the lord jesus christ. this, in turn, will delight god’s heart, for it fulfils his desire for the worship of his people. this was expressed by his son in these words: “the hour cometh, and now is, when the true worshippers shall worship the father in spirit and in truth; for the father seeketh such to worship him” (john 4:23) our last consideration, under the heading of the meaning of worship, is: 7. the root meaning of the word in the old testament those that understand such things have affirmed that the root meaning of the hebrew word carries the thought of “a dog to its master.” as one approaches the town of hartsdale from the city of new york, he will observe, to his left, an animal cemetery. it is perhaps the most ornate in the world. beneath marble monuments, some costing hundreds of dollars, like the remains of pet animals and even birds. many of these tombstone’s bear sentimental epitaphs, such as: “momsie’s only baby.” others are grotesque, as one over a dog which reads: “he cannot come to us, be we can go to him!” however, there is one epitaph that stands out from them all. it is of a dog whose master caused to be inscribed: “to the memory of bruce, the devoted servant, faithful friend, warm admirer, and ardent worshipper of his master.” then follows the name of its owner. does this not aptly describe what a dog is? dogs have been described, and not without some cause, as “man’s best friend.” a cynic once remarked: “the more i know of human beings, the better i appreciate dogs!” let us use an illustration to clarify this point. we will suppose that a man, warmly clad, ventures forth on a blustery and bitterly cold night. the temperature is below zero, and the streets are practically deserted. presently he sees a poor, neglected, shivering and half starved cur, sheltering behind a telephone pole from the biting wind. some cruel boys have tied a can to its tail, and it has been kicked from pillar to post, until now it is almost at the end of its tether. it will never survive a night like this on the streets. the man pauses and looks the dog over. what a pitiable sight it is: thin, miserable, frightened, homeless, hungry and on its last legs! his compassion is stirred and, yielding to the impulse of the moment, he stoops down, reaches out his hand and calls to the dog. suspicious as first, for the dog has good reasons for distrusting mankind, it gradually approaches, until at length it comes under his hand. the man pats it on the head, strokes it, all the while speaking kindly words. then, after removing the string and the can from its tail, he lifts it up, opens his overcoat, pops it in, and carries it back to his home. when he enters his home he says to his wife: “i’ve found a poor starving dog on the street, that will surely die tonight, unless it finds a home. please put a sack in the corner of the kitchen and we’ll take care of it for at least tonight.” accordingly, the dog is gently placed on the sack, and a delicious bowl of hot bread and milk is given it, followed by some scraps from the evening meal. for the first time in many days the dog wags its tail in gratitude for this unusual kindness. the next morning it greets its benefactors with another friendly wag of its tail, and they decide to give it a permanent home. a month passes by, and what a wonderful change it produces in that dog! as a result of good food and proper care, one would scarcely recognize the fine looking animal as that miserable starving cur of four weeks ago. one evening, as the man is sitting in an easy chair, with one hand hanging over the arm of the chair, he suddenly feels something warm and wet on his hand. glancing down he sees the dog looking up at him with adoring eyes as, again and again, it licks the hand of the one to whom it owes everything. the dog had not come into the room to beg for a bone, or even to be petted. it wanted nothing from its owner but the privilege of sitting in his presence, so that it might look at him with rapt, adoring eyes and, every now and then, to enjoy the privilege of licking the hand of the one whom it loved above all others. this is worship. now apply this to the believer, who once was a lost, guilty and helpless sinner, deserving only the judgment of a holy god. now, - through the grace of the lord jesus christ, - by faith in his substitutionary sacrifice and glorious resurrection, - by acceptance of him as saviour and lord, he has been: - redeemed, - saved - brought into a place of acceptance, provision and security. surely it is not too much for the lord to expect that his people, saved as such an infinite cost, will want, like that dog, to come into his presence in order to be occupied only with the one whom, “having not seen, they love” with all their hearts. may it be yours and mine to know something, by experience, of the real meaning and nature of worship, and thus fulfil his purpose in our salvation. the words of miss c.a. wellesley will form a fitting conclusion to this section of our study: “occupied with thee, lord jesus, in thy grace; all thy ways and thoughts about me only trace deeper stories of the glories of thy grace. taken up with thee lord jesus i would be; finding joy and satisfaction all in thee; thou the nearest and the dearest unto me.” ~ end of chapter 5 ~ http://www.baptistbiblebelievers.com/ ***

Tamil

senthamil

Last Update: 2015-01-20
Usage Frequency: 1
Quality:

Reference: Anonymous

English

sample written program for industrial safety 1 industrial safety program the following safety policy is provided only as a guide to assist employers and employees in complying with the requirements of 29 cfr 1910 and 1926, as well as to provide other helpful information. it is not intended to supersede the requirements of the standards. an employer should review the standards for particular requirements which are applicable to their individual situation and make adjustments to this program that are specific to their company. an employer will need to add information relevant to their particular facility in order to develop an effective, comprehensive program. 2 industrial safety program for (company name) table of contents topic safety & health policy statement safety & health goals new employee orientation safety & training employee responsibilities accident investigation/reporting personal protective equipment safety rules safety committee emergency action plan safety discipline employee confirmation 3 safety & health policy statement xyz manufacturing company believes that no job or task is more important than worker health and safety. if a job represents a potential safety or health threat, every effort will be made to plan a safe way to complete the task in a safe manner. every procedure must be a safe procedure. shortcuts in safe procedures by management and all other associates will not be tolerated. if a worker observes any unsafe or unprotected exposure, which may pose a potential threat to their safety & health, he or she must inform management immediately. if a job can not be done safely…………..it will not be done. every employee is entitled to a safe and healthful place in which to work. _______________________ president 4 safety & health goals the following goals have been established for xyz manufacturing company: (1) provide workers with a safe work environment. (2) conduct routine/regular workplace inspections. (3) provide personal protective equipment. (4) develop and implement safe work procedures and rules. (5) provide on-going safety training (6) enforce safety rules and appropriate discipline. (7) provide on-going property conservation practices. 5 new employee orientation all new employees must attend our safety orientation session prior to starting work within their assigned area. this session will be conducted under the direction of the safety director and in coordination with human resources. upon completion of the safety orientation session, each new employee will be required to acknowledge that they have received, understand, and will abide by the xyz company safety program. all participants must sign a statement verifying that they have completed the session. this report will be filed in the employee’s personnel file. the following topics will be covered in the safety orientation session:  company history  safety program/policy & work rules  responsibilities  safety education/training  safety audit/inspections  accident reporting/investigation requirements  first aid & bloodborne pathogens  personal protective equipment  tool & equipment use  material handling  lockout-tagout  machine guarding  mvr requirements  hazard communication  emergency action  return-to-work & light duty assignments all new hires will be provided an opportunity to ask any question that pertains to their job duties and employment at xyz manufacturing company. 6 safety & training all in-house safety & training sessions will be coordinated by (name of safety director). foremen and assistant foremen are required to be trained in accident investigation procedures by the safety director. operators of forklift trucks are to be trained in-house in accordance with federal/state requirements. operators must attend classroom instruction as well as “behind the wheel training”. all employees who work with, or are exposed to, hazardous chemicals are to be trained in hazard communication, in accordance with federal and state regulations. all employees who don respirators are to be trained in accordance with federal and state regulations. those individuals who don respirators are required to have annual physicals. machine operators and maintenance personnel are to be trained in lockout/tagout procedures. individual locks/keys will be assigned to those individuals participating in the loto program. all employees who don personal protective equipment (ppe) will be trained in the proper use of such equipment. first-aid training and bloodborne pathogen (bbp) training will be conducted by (name of hospital) and the local chapter of the american red cross. machine/equipment operators are to be trained in-house. emphasis is to be placed on point of operation guarding. no employee is allowed to operate a machine unless it is properly guarded. employees who operate company vehicles are required to participate in an in-house defensive driving program. 7 all production, shipping, and warehouse employees are required to attend a 4 hour in-house safety training session on an annual basis. this partial day session is held each january in the conference room. the safety director will decide the topic material; however each annual session is to place emphasis on material handling and machine guarding. all employees, at time of hire, are to be trained in emergency action and proper evacuation of building in case of an emergency. each employee is to be given instruction/training on where to exit and where to locate in the event of an emergency. foremen and assistant foremen are to meet with the safety director on a quarterly basis to discuss training needs and goals. 8 employee responsibilities each employee is responsible to follow established polices and procedures. regular attendance is required of all. following directions is critical. responsibility does not end with just taking care of you. unsafe working conditions and acts must be reported to management. it is the responsibility of each employee to work in a professional and safe manner. 9 accident investigation/reporting all injuries/illnesses must be reported to management as soon as possible. it is the policy of xyz manufacturing company to have all injuries/illnesses investigated by foremen or assistant foremen within 24 hours of incident. a formal accident investigation form (available from the safety director) must be forwarded to the safety director as soon as possible. it is important that all incidents be reported, no matter how slight. any property/liability loss claim must also be reported to management as soon as possible. the safety director will conduct a loss investigation of all property/liability claims. 10 personal protective equipment personal protective equipment (ppe) includes all clothing and accessories designed to protect against workplace hazards. in some situations the only available protection for employees will be the use of ppe and often in emergencies, ppe will be required for the safety of the workers. as required by federal and state regulations, personal protective equipment is essential for the protection of eyes, ears, face and other body parts when working around hazardous machinery and equipment. all ppe must meet established standards (ansi, niosh, osha, etc). all personal protective equipment (ppe) is provided by xyz manufacturing company. employees are not allowed to provide their own ppe unless authorized by the safety director. as a general rule, only company provided ppe is allowed. hazard assessments have been completed throughout the production and warehouse areas of xyz manufacturing company. ppe is required in the following areas: warehouse all employees and visitors are required to wear approved hard hats and eye protection. steel-toed shoes/boots required of warehouse workers. welding shop all employees and visitors are required to wear approved eye protection. approved hard hats required of all welders. approved hearing protection required of all welders. welders are also required to don approved ppe in the form of goggles, helmet, leather coat, apron, steel-toed work boot, gloves, no cuff pants and other 11 equipment as deemed necessary by the safety director. mechanical ventilation is required at all welding stations. paint shop all employees and visitors are required to wear approved eye protection. spray painters are required to wear company provided work clothing (disposable shirt/pants). approved respirators are required during those times when spray painting, mixing, or clean-up is taking place. steel-toed boots/shoes required of paint sprayers. all spray painting is to be conducted within the paint spray booth. mechanical ventilation system is to be in operation when spray painting takes place. general production areas approved eye protection required of all who enter shop. visitor glasses (eye protection) are available in main office as well as next to loading dock door and warehouse entrance. xyz manufacturing company will reimburse employee (maximum - $100) each 24 months for the purchase of approved steel-toed boot/shoe. xyz manufacturing company will provide prescription eye wear (approved safety eye protection) for those individuals requesting same. see safety director for additional information. 12 safety rules all safety rules must be obeyed. failure to do so will result in strict disciplinary action.  all injuries must be reported as soon as possible.  no horseplay, alcohol, or drugs allowed on premises.  no alcohol usage allowed during lunch break.  ppe must be worn as prescribed by management.  all tools/equipment must be maintained in good condition.  only appropriate tools shall be used for specific jobs.  all guards must be kept in place.  no spliced electrical cords/wiring allowed.  only authorized personnel can operate forklift vehicles.  smoking allowed only in lunchroom.  seat belt use required of all drivers/passengers.  all osha safety standards will be followed for job processes requiring respiratory protection. *see separate written respiratory protection program.  all osha safety standards concerning lockout/tagout of energized equipment will be followed. *see separate written lockout/tagout program.  all osha safety standards concerning hazard communications will be followed. *see separate written hazard communications program. 13  all osha safety standards concerning forklift safety will be followed. *see separate written forklift safety program. *these sample written safety programs can be found on the frankenmuth safety services website. they can be downloaded as a pdf or microsoft word file. 14 safety committee the primary purpose of the safety committee is to promote safety awareness and reduce the potential for injury/loss throughout xyz manufacturing company. the safety committee is to be chaired by the safety director and include representatives from each department (total number of committee members not to exceed five individuals). members can be volunteers or appointed. membership is limited to two terms (1 year each) during any four year period. meetings are to be scheduled, when possible, for the same day each month (2nd tuesday of each month – 2:00 p.m.). all meetings are to take place in the conference room. each meeting should have a set agenda and minutes of each meeting recorded. a copy of the minutes shall be forwarded to the executive vice-president within 48 hours of meeting. each safety committee meeting shall include a review of the prior month’s minutes as well as a review of the prior month’s injury/illness log and investigations of losses/claims. past injuries/claims/losses need to be reviewed for any patterns or trends. general functions of the safety committee can include: (1) identifying workplace hazards (2) enforcement of safety rules (3) measuring safety performance (4) reducing frequency/severity of injuries (5) creating safety policies (6) developing and monitoring safety programs specific tasks of the safety committee can include: (1) conducting self-inspections of the workplace 15 (2) review employee reports of hazards (3) assist in safety training (4) creating safety incentive programs (5) publish/distribute safety newsletter (6) inspect ppe (7) post safety posters/slogans on bulletin board (8) identify light duty jobs the safety committee of xyz manufacturing company was formed to promote safety throughout our organization. the benefits of a safety committee are numerous and xyz manufacturing believes that this is a forum for problem solving. the safety committee has an open door policy and welcomes suggestions. 16 emergency action plan the emergency action plan (eap) is in place to ensure employee safety from fire and other emergency. at the time of an emergency, all employees should know what type of evacuation is necessary and what their role is in carrying out the plan. in some emergencies total and immediate evacuation will be necessary. in other emergencies only partial evacuation may be necessary. when a fire is detected it is necessary that the fire alarm pull station be activated as soon as possible. the fire alarm will notify the emergency response team who will perform assigned duties. the activation of the alarm will also notify the local fire department. in the event of bomb threat, toxic chemical release, hazardous weather, or other emergencies – notification will be made over the public address system. in the event of fire, bomb threat, or toxic chemical release; employees are to proceed to the nearest available and safe exit and leave the building as soon as possible. floor plans (maps) and exits have been posted in each department. it is of critical importance that all employees and visitors are accounted for. shop and warehouse employees are to meet in the __________ parking lot on _______ street. secondary location is the intersection of _________ and ________ street. office employees are to meet in the __________ parking lot on __________ street. secondary location is the intersection of __________ and __________ street. 17 in the event of weather emergencies all employees (and visitors) are to evacuate their assigned area and report to the lower level bomb shelter. again, it is of critical importance that all employees and visitors are accounted for. supervisors within each area shall take a head count at the designated meeting areas. it is the responsibility of each supervisor to advise fire and police departments of any missing persons. there will be evacuation training each april and october (full evacuation to designated areas). 18 safety discipline management personnel at all levels are responsible for taking action when a violation is observed. if a violation is observed, they must take action immediately to correct the violation and enforce this disciplinary policy. employees who fail to follow safety rules and regulations established to protect them and their fellow employees endanger themselves and others. visitors and contractors on site are also required to abide by the safety rules and regulations. the following procedures will be followed when a violation is observed: first violation* verbal warning with written confirmation in personnel file. second violation* written warning and ½ day suspension (written confirmation in personnel file). third violation* written warning and one week suspension (written confirmation in personnel file). fourth violation* termination (written confirmation in personnel file). 19 *as warranted by type of violation (use of drugs/alcohol, criminal activity, etc.) termination of employment may take place after any such violation. employee confirmation of safety program this is to certify that i, ___________________________________, have read and will observe the safety practices as outlined in this booklet and other rules presented to me during my employment with xyz manufacturing company. i understand that the safety practices listed are not the only procedures and/or rules that i will be called upon to follow. i also understand that it is a requirement of my employment that any injury/illness be reported to my supervisor immediately. signed _________________________________________ witness ________________________________________ date _______________________ this form to be filed in personnel file the information and suggestions contained in this material have been developed from sources believed to be reliable. however, frankenmuth accepts no legal responsibility for the correctness or completeness of this material, or its application to specific factual situations.

Tamil

தமிழ் தொழில்துறை பாதுகாப்பு பற்றிய கட்டுரை

Last Update: 2017-03-05
Usage Frequency: 1
Quality:

Reference: Anonymous
Warning: Contains invisible HTML formatting

English

sample written program for industrial safety 1 industrial safety program the following safety policy is provided only as a guide to assist employers and employees in complying with the requirements of 29 cfr 1910 and 1926, as well as to provide other helpful information. it is not intended to supersede the requirements of the standards. an employer should review the standards for particular requirements which are applicable to their individual situation and make adjustments to this program that are specific to their company. an employer will need to add information relevant to their particular facility in order to develop an effective, comprehensive program. 2 industrial safety program for (company name) table of contents topic safety & health policy statement safety & health goals new employee orientation safety & training employee responsibilities accident investigation/reporting personal protective equipment safety rules safety committee emergency action plan safety discipline employee confirmation 3 safety & health policy statement xyz manufacturing company believes that no job or task is more important than worker health and safety. if a job represents a potential safety or health threat, every effort will be made to plan a safe way to complete the task in a safe manner. every procedure must be a safe procedure. shortcuts in safe procedures by management and all other associates will not be tolerated. if a worker observes any unsafe or unprotected exposure, which may pose a potential threat to their safety & health, he or she must inform management immediately. if a job can not be done safely…………..it will not be done. every employee is entitled to a safe and healthful place in which to work. _______________________ president 4 safety & health goals the following goals have been established for xyz manufacturing company: (1) provide workers with a safe work environment. (2) conduct routine/regular workplace inspections. (3) provide personal protective equipment. (4) develop and implement safe work procedures and rules. (5) provide on-going safety training (6) enforce safety rules and appropriate discipline. (7) provide on-going property conservation practices. 5 new employee orientation all new employees must attend our safety orientation session prior to starting work within their assigned area. this session will be conducted under the direction of the safety director and in coordination with human resources. upon completion of the safety orientation session, each new employee will be required to acknowledge that they have received, understand, and will abide by the xyz company safety program. all participants must sign a statement verifying that they have completed the session. this report will be filed in the employee’s personnel file. the following topics will be covered in the safety orientation session:  company history  safety program/policy & work rules  responsibilities  safety education/training  safety audit/inspections  accident reporting/investigation requirements  first aid & bloodborne pathogens  personal protective equipment  tool & equipment use  material handling  lockout-tagout  machine guarding  mvr requirements  hazard communication  emergency action  return-to-work & light duty assignments all new hires will be provided an opportunity to ask any question that pertains to their job duties and employment at xyz manufacturing company. 6 safety & training all in-house safety & training sessions will be coordinated by (name of safety director). foremen and assistant foremen are required to be trained in accident investigation procedures by the safety director. operators of forklift trucks are to be trained in-house in accordance with federal/state requirements. operators must attend classroom instruction as well as “behind the wheel training”. all employees who work with, or are exposed to, hazardous chemicals are to be trained in hazard communication, in accordance with federal and state regulations. all employees who don respirators are to be trained in accordance with federal and state regulations. those individuals who don respirators are required to have annual physicals. machine operators and maintenance personnel are to be trained in lockout/tagout procedures. individual locks/keys will be assigned to those individuals participating in the loto program. all employees who don personal protective equipment (ppe) will be trained in the proper use of such equipment. first-aid training and bloodborne pathogen (bbp) training will be conducted by (name of hospital) and the local chapter of the american red cross. machine/equipment operators are to be trained in-house. emphasis is to be placed on point of operation guarding. no employee is allowed to operate a machine unless it is properly guarded. employees who operate company vehicles are required to participate in an in-house defensive driving program. 7 all production, shipping, and warehouse employees are required to attend a 4 hour in-house safety training session on an annual basis. this partial day session is held each january in the conference room. the safety director will decide the topic material; however each annual session is to place emphasis on material handling and machine guarding. all employees, at time of hire, are to be trained in emergency action and proper evacuation of building in case of an emergency. each employee is to be given instruction/training on where to exit and where to locate in the event of an emergency. foremen and assistant foremen are to meet with the safety director on a quarterly basis to discuss training needs and goals. 8 employee responsibilities each employee is responsible to follow established polices and procedures. regular attendance is required of all. following directions is critical. responsibility does not end with just taking care of you. unsafe working conditions and acts must be reported to management. it is the responsibility of each employee to work in a professional and safe manner. 9 accident investigation/reporting all injuries/illnesses must be reported to management as soon as possible. it is the policy of xyz manufacturing company to have all injuries/illnesses investigated by foremen or assistant foremen within 24 hours of incident. a formal accident investigation form (available from the safety director) must be forwarded to the safety director as soon as possible. it is important that all incidents be reported, no matter how slight. any property/liability loss claim must also be reported to management as soon as possible. the safety director will conduct a loss investigation of all property/liability claims. 10 personal protective equipment personal protective equipment (ppe) includes all clothing and accessories designed to protect against workplace hazards. in some situations the only available protection for employees will be the use of ppe and often in emergencies, ppe will be required for the safety of the workers. as required by federal and state regulations, personal protective equipment is essential for the protection of eyes, ears, face and other body parts when working around hazardous machinery and equipment. all ppe must meet established standards (ansi, niosh, osha, etc). all personal protective equipment (ppe) is provided by xyz manufacturing company. employees are not allowed to provide their own ppe unless authorized by the safety director. as a general rule, only company provided ppe is allowed. hazard assessments have been completed throughout the production and warehouse areas of xyz manufacturing company. ppe is required in the following areas: warehouse all employees and visitors are required to wear approved hard hats and eye protection. steel-toed shoes/boots required of warehouse workers. welding shop all employees and visitors are required to wear approved eye protection. approved hard hats required of all welders. approved hearing protection required of all welders. welders are also required to don approved ppe in the form of goggles, helmet, leather coat, apron, steel-toed work boot, gloves, no cuff pants and other 11 equipment as deemed necessary by the safety director. mechanical ventilation is required at all welding stations. paint shop all employees and visitors are required to wear approved eye protection. spray painters are required to wear company provided work clothing (disposable shirt/pants). approved respirators are required during those times when spray painting, mixing, or clean-up is taking place. steel-toed boots/shoes required of paint sprayers. all spray painting is to be conducted within the paint spray booth. mechanical ventilation system is to be in operation when spray painting takes place. general production areas approved eye protection required of all who enter shop. visitor glasses (eye protection) are available in main office as well as next to loading dock door and warehouse entrance. xyz manufacturing company will reimburse employee (maximum - $100) each 24 months for the purchase of approved steel-toed boot/shoe. xyz manufacturing company will provide prescription eye wear (approved safety eye protection) for those individuals requesting same. see safety director for additional information. 12 safety rules all safety rules must be obeyed. failure to do so will result in strict disciplinary action.  all injuries must be reported as soon as possible.  no horseplay, alcohol, or drugs allowed on premises.  no alcohol usage allowed during lunch break.  ppe must be worn as prescribed by management.  all tools/equipment must be maintained in good condition.  only appropriate tools shall be used for specific jobs.  all guards must be kept in place.  no spliced electrical cords/wiring allowed.  only authorized personnel can operate forklift vehicles.  smoking allowed only in lunchroom.  seat belt use required of all drivers/passengers.  all osha safety standards will be followed for job processes requiring respiratory protection. *see separate written respiratory protection program.  all osha safety standards concerning lockout/tagout of energized equipment will be followed. *see separate written lockout/tagout program.  all osha safety standards concerning hazard communications will be followed. *see separate written hazard communications program. 13  all osha safety standards concerning forklift safety will be followed. *see separate written forklift safety program. *these sample written safety programs can be found on the frankenmuth safety services website. they can be downloaded as a pdf or microsoft word file. 14 safety committee the primary purpose of the safety committee is to promote safety awareness and reduce the potential for injury/loss throughout xyz manufacturing company. the safety committee is to be chaired by the safety director and include representatives from each department (total number of committee members not to exceed five individuals). members can be volunteers or appointed. membership is limited to two terms (1 year each) during any four year period. meetings are to be scheduled, when possible, for the same day each month (2nd tuesday of each month – 2:00 p.m.). all meetings are to take place in the conference room. each meeting should have a set agenda and minutes of each meeting recorded. a copy of the minutes shall be forwarded to the executive vice-president within 48 hours of meeting. each safety committee meeting shall include a review of the prior month’s minutes as well as a review of the prior month’s injury/illness log and investigations of losses/claims. past injuries/claims/losses need to be reviewed for any patterns or trends. general functions of the safety committee can include: (1) identifying workplace hazards (2) enforcement of safety rules (3) measuring safety performance (4) reducing frequency/severity of injuries (5) creating safety policies (6) developing and monitoring safety programs specific tasks of the safety committee can include: (1) conducting self-inspections of the workplace 15 (2) review employee reports of hazards (3) assist in safety training (4) creating safety incentive programs (5) publish/distribute safety newsletter (6) inspect ppe (7) post safety posters/slogans on bulletin board (8) identify light duty jobs the safety committee of xyz manufacturing company was formed to promote safety throughout our organization. the benefits of a safety committee are numerous and xyz manufacturing believes that this is a forum for problem solving. the safety committee has an open door policy and welcomes suggestions. 16 emergency action plan the emergency action plan (eap) is in place to ensure employee safety from fire and other emergency. at the time of an emergency, all employees should know what type of evacuation is necessary and what their role is in carrying out the plan. in some emergencies total and immediate evacuation will be necessary. in other emergencies only partial evacuation may be necessary. when a fire is detected it is necessary that the fire alarm pull station be activated as soon as possible. the fire alarm will notify the emergency response team who will perform assigned duties. the activation of the alarm will also notify the local fire department. in the event of bomb threat, toxic chemical release, hazardous weather, or other emergencies – notification will be made over the public address system. in the event of fire, bomb threat, or toxic chemical release; employees are to proceed to the nearest available and safe exit and leave the building as soon as possible. floor plans (maps) and exits have been posted in each department. it is of critical importance that all employees and visitors are accounted for. shop and warehouse employees are to meet in the __________ parking lot on _______ street. secondary location is the intersection of _________ and ________ street. office employees are to meet in the __________ parking lot on __________ street. secondary location is the intersection of __________ and __________ street. 17 in the event of weather emergencies all employees (and visitors) are to evacuate their assigned area and report to the lower level bomb shelter. again, it is of critical importance that all employees and visitors are accounted for. supervisors within each area shall take a head count at the designated meeting areas. it is the responsibility of each supervisor to advise fire and police departments of any missing persons. there will be evacuation training each april and october (full evacuation to designated areas). 18 safety discipline management personnel at all levels are responsible for taking action when a violation is observed. if a violation is observed, they must take action immediately to correct the violation and enforce this disciplinary policy. employees who fail to follow safety rules and regulations established to protect them and their fellow employees endanger themselves and others. visitors and contractors on site are also required to abide by the safety rules and regulations. the following procedures will be followed when a violation is observed: first violation* verbal warning with written confirmation in personnel file. second violation* written warning and ½ day suspension (written confirmation in personnel file). third violation* written warning and one week suspension (written confirmation in personnel file). fourth violation* termination (written confirmation in personnel file). 19 *as warranted by type of violation (use of drugs/alcohol, criminal activity, etc.) termination of employment may take place after any such violation. employee confirmation of safety program this is to certify that i, ___________________________________, have read and will observe the safety practices as outlined in this booklet and other rules presented to me during my employment with xyz manufacturing company. i understand that the safety practices listed are not the only procedures and/or rules that i will be called upon to follow. i also understand that it is a requirement of my employment that any injury/illness be reported to my supervisor immediately. signed _________________________________________ witness ________________________________________ date _______________________ this form to be filed in personnel file the information and suggestions contained in this material have been developed from sources believed to be reliable. however, frankenmuth accepts no legal responsibility for the correctness or completeness of this material, or its application to specific factual situations.

Tamil

தமிழ் தொழில்துறை பாதுகாப்பு பற்றிய கட்டுரை

Last Update: 2017-03-05
Usage Frequency: 1
Quality:

Reference: Anonymous
Warning: Contains invisible HTML formatting

English

sample written program for industrial safety 1 industrial safety program the following safety policy is provided only as a guide to assist employers and employees in complying with the requirements of 29 cfr 1910 and 1926, as well as to provide other helpful information. it is not intended to supersede the requirements of the standards. an employer should review the standards for particular requirements which are applicable to their individual situation and make adjustments to this program that are specific to their company. an employer will need to add information relevant to their particular facility in order to develop an effective, comprehensive program. 2 industrial safety program for (company name) table of contents topic safety & health policy statement safety & health goals new employee orientation safety & training employee responsibilities accident investigation/reporting personal protective equipment safety rules safety committee emergency action plan safety discipline employee confirmation 3 safety & health policy statement xyz manufacturing company believes that no job or task is more important than worker health and safety. if a job represents a potential safety or health threat, every effort will be made to plan a safe way to complete the task in a safe manner. every procedure must be a safe procedure. shortcuts in safe procedures by management and all other associates will not be tolerated. if a worker observes any unsafe or unprotected exposure, which may pose a potential threat to their safety & health, he or she must inform management immediately. if a job can not be done safely…………..it will not be done. every employee is entitled to a safe and healthful place in which to work. _______________________ president 4 safety & health goals the following goals have been established for xyz manufacturing company: (1) provide workers with a safe work environment. (2) conduct routine/regular workplace inspections. (3) provide personal protective equipment. (4) develop and implement safe work procedures and rules. (5) provide on-going safety training (6) enforce safety rules and appropriate discipline. (7) provide on-going property conservation practices. 5 new employee orientation all new employees must attend our safety orientation session prior to starting work within their assigned area. this session will be conducted under the direction of the safety director and in coordination with human resources. upon completion of the safety orientation session, each new employee will be required to acknowledge that they have received, understand, and will abide by the xyz company safety program. all participants must sign a statement verifying that they have completed the session. this report will be filed in the employee’s personnel file. the following topics will be covered in the safety orientation session:  company history  safety program/policy & work rules  responsibilities  safety education/training  safety audit/inspections  accident reporting/investigation requirements  first aid & bloodborne pathogens  personal protective equipment  tool & equipment use  material handling  lockout-tagout  machine guarding  mvr requirements  hazard communication  emergency action  return-to-work & light duty assignments all new hires will be provided an opportunity to ask any question that pertains to their job duties and employment at xyz manufacturing company. 6 safety & training all in-house safety & training sessions will be coordinated by (name of safety director). foremen and assistant foremen are required to be trained in accident investigation procedures by the safety director. operators of forklift trucks are to be trained in-house in accordance with federal/state requirements. operators must attend classroom instruction as well as “behind the wheel training”. all employees who work with, or are exposed to, hazardous chemicals are to be trained in hazard communication, in accordance with federal and state regulations. all employees who don respirators are to be trained in accordance with federal and state regulations. those individuals who don respirators are required to have annual physicals. machine operators and maintenance personnel are to be trained in lockout/tagout procedures. individual locks/keys will be assigned to those individuals participating in the loto program. all employees who don personal protective equipment (ppe) will be trained in the proper use of such equipment. first-aid training and bloodborne pathogen (bbp) training will be conducted by (name of hospital) and the local chapter of the american red cross. machine/equipment operators are to be trained in-house. emphasis is to be placed on point of operation guarding. no employee is allowed to operate a machine unless it is properly guarded. employees who operate company vehicles are required to participate in an in-house defensive driving program. 7 all production, shipping, and warehouse employees are required to attend a 4 hour in-house safety training session on an annual basis. this partial day session is held each january in the conference room. the safety director will decide the topic material; however each annual session is to place emphasis on material handling and machine guarding. all employees, at time of hire, are to be trained in emergency action and proper evacuation of building in case of an emergency. each employee is to be given instruction/training on where to exit and where to locate in the event of an emergency. foremen and assistant foremen are to meet with the safety director on a quarterly basis to discuss training needs and goals. 8 employee responsibilities each employee is responsible to follow established polices and procedures. regular attendance is required of all. following directions is critical. responsibility does not end with just taking care of you. unsafe working conditions and acts must be reported to management. it is the responsibility of each employee to work in a professional and safe manner. 9 accident investigation/reporting all injuries/illnesses must be reported to management as soon as possible. it is the policy of xyz manufacturing company to have all injuries/illnesses investigated by foremen or assistant foremen within 24 hours of incident. a formal accident investigation form (available from the safety director) must be forwarded to the safety director as soon as possible. it is important that all incidents be reported, no matter how slight. any property/liability loss claim must also be reported to management as soon as possible. the safety director will conduct a loss investigation of all property/liability claims. 10 personal protective equipment personal protective equipment (ppe) includes all clothing and accessories designed to protect against workplace hazards. in some situations the only available protection for employees will be the use of ppe and often in emergencies, ppe will be required for the safety of the workers. as required by federal and state regulations, personal protective equipment is essential for the protection of eyes, ears, face and other body parts when working around hazardous machinery and equipment. all ppe must meet established standards (ansi, niosh, osha, etc). all personal protective equipment (ppe) is provided by xyz manufacturing company. employees are not allowed to provide their own ppe unless authorized by the safety director. as a general rule, only company provided ppe is allowed. hazard assessments have been completed throughout the production and warehouse areas of xyz manufacturing company. ppe is required in the following areas: warehouse all employees and visitors are required to wear approved hard hats and eye protection. steel-toed shoes/boots required of warehouse workers. welding shop all employees and visitors are required to wear approved eye protection. approved hard hats required of all welders. approved hearing protection required of all welders. welders are also required to don approved ppe in the form of goggles, helmet, leather coat, apron, steel-toed work boot, gloves, no cuff pants and other 11 equipment as deemed necessary by the safety director. mechanical ventilation is required at all welding stations. paint shop all employees and visitors are required to wear approved eye protection. spray painters are required to wear company provided work clothing (disposable shirt/pants). approved respirators are required during those times when spray painting, mixing, or clean-up is taking place. steel-toed boots/shoes required of paint sprayers. all spray painting is to be conducted within the paint spray booth. mechanical ventilation system is to be in operation when spray painting takes place. general production areas approved eye protection required of all who enter shop. visitor glasses (eye protection) are available in main office as well as next to loading dock door and warehouse entrance. xyz manufacturing company will reimburse employee (maximum - $100) each 24 months for the purchase of approved steel-toed boot/shoe. xyz manufacturing company will provide prescription eye wear (approved safety eye protection) for those individuals requesting same. see safety director for additional information. 12 safety rules all safety rules must be obeyed. failure to do so will result in strict disciplinary action.  all injuries must be reported as soon as possible.  no horseplay, alcohol, or drugs allowed on premises.  no alcohol usage allowed during lunch break.  ppe must be worn as prescribed by management.  all tools/equipment must be maintained in good condition.  only appropriate tools shall be used for specific jobs.  all guards must be kept in place.  no spliced electrical cords/wiring allowed.  only authorized personnel can operate forklift vehicles.  smoking allowed only in lunchroom.  seat belt use required of all drivers/passengers.  all osha safety standards will be followed for job processes requiring respiratory protection. *see separate written respiratory protection program.  all osha safety standards concerning lockout/tagout of energized equipment will be followed. *see separate written lockout/tagout program.  all osha safety standards concerning hazard communications will be followed. *see separate written hazard communications program. 13  all osha safety standards concerning forklift safety will be followed. *see separate written forklift safety program. *these sample written safety programs can be found on the frankenmuth safety services website. they can be downloaded as a pdf or microsoft word file. 14 safety committee the primary purpose of the safety committee is to promote safety awareness and reduce the potential for injury/loss throughout xyz manufacturing company. the safety committee is to be chaired by the safety director and include representatives from each department (total number of committee members not to exceed five individuals). members can be volunteers or appointed. membership is limited to two terms (1 year each) during any four year period. meetings are to be scheduled, when possible, for the same day each month (2nd tuesday of each month – 2:00 p.m.). all meetings are to take place in the conference room. each meeting should have a set agenda and minutes of each meeting recorded. a copy of the minutes shall be forwarded to the executive vice-president within 48 hours of meeting. each safety committee meeting shall include a review of the prior month’s minutes as well as a review of the prior month’s injury/illness log and investigations of losses/claims. past injuries/claims/losses need to be reviewed for any patterns or trends. general functions of the safety committee can include: (1) identifying workplace hazards (2) enforcement of safety rules (3) measuring safety performance (4) reducing frequency/severity of injuries (5) creating safety policies (6) developing and monitoring safety programs specific tasks of the safety committee can include: (1) conducting self-inspections of the workplace 15 (2) review employee reports of hazards (3) assist in safety training (4) creating safety incentive programs (5) publish/distribute safety newsletter (6) inspect ppe (7) post safety posters/slogans on bulletin board (8) identify light duty jobs the safety committee of xyz manufacturing company was formed to promote safety throughout our organization. the benefits of a safety committee are numerous and xyz manufacturing believes that this is a forum for problem solving. the safety committee has an open door policy and welcomes suggestions. 16 emergency action plan the emergency action plan (eap) is in place to ensure employee safety from fire and other emergency. at the time of an emergency, all employees should know what type of evacuation is necessary and what their role is in carrying out the plan. in some emergencies total and immediate evacuation will be necessary. in other emergencies only partial evacuation may be necessary. when a fire is detected it is necessary that the fire alarm pull station be activated as soon as possible. the fire alarm will notify the emergency response team who will perform assigned duties. the activation of the alarm will also notify the local fire department. in the event of bomb threat, toxic chemical release, hazardous weather, or other emergencies – notification will be made over the public address system. in the event of fire, bomb threat, or toxic chemical release; employees are to proceed to the nearest available and safe exit and leave the building as soon as possible. floor plans (maps) and exits have been posted in each department. it is of critical importance that all employees and visitors are accounted for. shop and warehouse employees are to meet in the __________ parking lot on _______ street. secondary location is the intersection of _________ and ________ street. office employees are to meet in the __________ parking lot on __________ street. secondary location is the intersection of __________ and __________ street. 17 in the event of weather emergencies all employees (and visitors) are to evacuate their assigned area and report to the lower level bomb shelter. again, it is of critical importance that all employees and visitors are accounted for. supervisors within each area shall take a head count at the designated meeting areas. it is the responsibility of each supervisor to advise fire and police departments of any missing persons. there will be evacuation training each april and october (full evacuation to designated areas). 18 safety discipline management personnel at all levels are responsible for taking action when a violation is observed. if a violation is observed, they must take action immediately to correct the violation and enforce this disciplinary policy. employees who fail to follow safety rules and regulations established to protect them and their fellow employees endanger themselves and others. visitors and contractors on site are also required to abide by the safety rules and regulations. the following procedures will be followed when a violation is observed: first violation* verbal warning with written confirmation in personnel file. second violation* written warning and ½ day suspension (written confirmation in personnel file). third violation* written warning and one week suspension (written confirmation in personnel file). fourth violation* termination (written confirmation in personnel file). 19 *as warranted by type of violation (use of drugs/alcohol, criminal activity, etc.) termination of employment may take place after any such violation. employee confirmation of safety program this is to certify that i, ___________________________________, have read and will observe the safety practices as outlined in this booklet and other rules presented to me during my employment with xyz manufacturing company. i understand that the safety practices listed are not the only procedures and/or rules that i will be called upon to follow. i also understand that it is a requirement of my employment that any injury/illness be reported to my supervisor immediately. signed _________________________________________ witness ________________________________________ date _______________________ this form to be filed in personnel file the information and suggestions contained in this material have been developed from sources believed to be reliable. however, frankenmuth accepts no legal responsibility for the correctness or completeness of this material, or its application to specific factual situations.

Tamil

தமிழ் தொழில்துறை பாதுகாப்பு பற்றிய கட்டுரை

Last Update: 2017-03-05
Usage Frequency: 1
Quality:

Reference: Anonymous
Warning: Contains invisible HTML formatting

Get a better translation with
4,401,923,520 human contributions

Users are now asking for help:



We use cookies to enhance your experience. By continuing to visit this site you agree to our use of cookies. Learn more. OK