From professional translators, enterprises, web pages and freely available translation repositories.
wyposażenie stanowiska dynamometrycznego
equipment of the dynamometer
Last Update: 2019-02-08
Usage Frequency: 2
Quality:
nastawa hamulca dynamometrycznego.
dynamometer setting.
Last Update: 2019-02-08
Usage Frequency: 2
Quality:
obciążenie hamulca dynamometrycznego, n
dynamometer brake load, n
Last Update: 2019-02-08
Usage Frequency: 3
Quality:
wyposażenie bezwładnościowego stanowiska dynamometrycznego
equipping the dynamometer
Last Update: 2019-02-08
Usage Frequency: 2
Quality:
masa bezwładności bezwładnościowego stanowiska dynamometrycznego
inertia mass of the inertia dynamometer
Last Update: 2019-02-08
Usage Frequency: 2
Quality:
program hamulca dynamometrycznego dla badania nrtc
nrtc dynamometer schedule
Last Update: 2019-02-08
Usage Frequency: 2
Quality:
prędkość obrotowa hamulca dynamometrycznego, min-1
rotational speed of dynamometer brake, min-1
Last Update: 2019-02-08
Usage Frequency: 3
Quality:
metoda dynamometrycznego badania bezwŁadnoŚciowego okŁadzin hamulcowych
inertia dynamometer test method for brake linings
Last Update: 2019-02-08
Usage Frequency: 3
Quality:
moc, nieskorygowana i mierzona przy użyciu hamulca dynamometrycznego.
power, brake uncorrected.
Last Update: 2019-02-08
Usage Frequency: 2
Quality:
graficzne przedstawienie programu hamulca dynamometrycznego dla badania nrtc znajduje się poniżej.
a graphical display of the nrtc dynamometer schedule is shown below
Last Update: 2019-02-08
Usage Frequency: 2
Quality:
badania wykonuje się za pomocą dynamometrycznego stanowiska bezwładnościowego o następujących właściwościach:
a dynamometer having the following characteristics shall be used for the tests:
Last Update: 2019-02-08
Usage Frequency: 3
Quality:
energia kinetyczna urządzenia jest wyrównywana przez hamulec i tarcie dynamometrycznego stanowiska rolkowego.
the kinetic energy of the device is dissipated by the brake and by the friction of the dynamometer.
Last Update: 2019-02-08
Usage Frequency: 3
Quality:
rozpocząć rejestrowanie danych sprzężenia zwrotnego dla prędkości obrotowej i momentu obrotowego hamulca dynamometrycznego.
start recording the feedback data of speed and torque of the dynamometer.
Last Update: 2019-02-08
Usage Frequency: 2
Quality:
na wał stanowiska dynamometrycznego oddziaływać rosnącym powoli momentem obrotowym, w celu obrócenia bębna lub tarczy.
put a slowly increasing torque on the dyno shaft in order to turn the drum or disc.
Last Update: 2019-02-08
Usage Frequency: 2
Quality:
przy stosowaniu hamulca dynamometrycznego dla badanego silnika należy przestrzegać następujących cykli badania dla danego typu urządzenia.
the following test cycles shall be followed in dynamometer operation on the test engine according to the given type of machinery:
Last Update: 2019-02-08
Usage Frequency: 3
Quality:
dokładność dolnej połowy zakresu pomiarowego stanowiska dynamometrycznego może stanowić ± 2 % zmierzonego momentu obrotowego.
the accuracy in the lower half of the measuring range of the dynamometer bench may be ± 2 per cent of measured torque.
Last Update: 2019-02-08
Usage Frequency: 1
Quality:
silnik należy uruchomić zgodnie z procedurą rozruchu zaleconą przez producenta w instrukcji obsługi, z wykorzystaniem rozrusznika produkcyjnego lub hamulca dynamometrycznego.
the engine shall be started according to the starting procedure recommended by the manufacturer in the owner's manual, using either a production starter motor or the dynamometer.
Last Update: 2019-02-08
Usage Frequency: 2
Quality:
wymaga stosowania specjalnych narzędzi, narzędzi kalibrowanych (z wyjątkiem klucza dynamometrycznego i zagniataka); i/lub
requires the use of special tools, calibrated tools (except torque wrench and crimping tool) and/or;
Last Update: 2019-02-08
Usage Frequency: 4
Quality:
dokręcić śrubę i nakrętkę regulującą przechodzące przez głowę i staw kłykcia potylicznego przy pomocy klucza dynamometrycznego, tak aby głowa nie mogła się poruszać wskutek siły ciążenia.
tighten the bolt and adjustment nut through the head and the oc joint using a torque wrench until the head is unable to move due to gravity.
Last Update: 2019-02-08
Usage Frequency: 1
Quality:
ustawienia hamulca dynamometrycznego mogą być dokonane przy stałej prędkości 80 km/h zgodnie z wymaganiami określonymi w dodatku 3."
the dynamometer setting may be carried out at a constant speed of 80 km/h in accordance with the requirements of appendix 3.`