Vous avez cherché: elastika (Maltais - Anglais)

diflessjoni elastika
3.3.elastic deflection

2 - deflessjoni elastika
2 – elastic deflection

deformazzjoni elastika hija permessa.
elastic deformation shall be admissible.

deflessjoni elastika taħt tagħbija mill-ġenb
elastic deflection under side loading

deflessjoni elastika (taħt impatt mill-ġenb)
elastic deflection (under side impact)

3 - deflessjoni totali (permanenti u elastika)
3 – total deflection (permanent plus elastic)

diflessjoni elastika (tagħbija ta' taħt il-ġenb).
3.3elastic deflection (under side loading)

3 – deflessjoni totali (permanenti kif ukoll elastika)
3 – total deflection (permanent plus elastic)

eżempju ta' apparat għall-kejl tad-deflessjoni elastika
example of apparatus for measuring elastic deflection

tkun issikkata mal-qadd permezz ta' strixxa elastika u drawstring.
it is tighened at the waist by means of an elastic strip and a drawstring.

hemm evidenza li d-domanda ta' l-industrija għall-ilma hija ta' natura elastika.
there is evidence of elasticity of demand for industrial water.

il-valur tad-deformazzjoni permanenti rrekordjata ma tridx taqbeż il-25 % tad-deformazzjoni elastika massima li sseħħ.
the permanent deformation value recorded must not exceed 25 % of the maximum elastic deformation occurring.

sabiex ikun jista' jsir it-test addizzjonali, jeħtieġ li titkejjel id-diformazzjoni elastika waqt it-testijiet kollha ta' impatt.
in order to be able to carry out the additional test, it is necessary to measure the elastic deformation during all of the impact tests.

film ta’ lopolimeru tal-vinyl alcohol, li jinħall fl-ilma kiesaħ, bi ħxuna ta’ 34 μm jew aktar iżda li ma taqbiżx 90 μm, b’reżistenza elastika għall-ksur (tensile strength at break) ta’ 20 mpa jew aktar iżda li ma taqbiżx 45 mpa u titwil sal-ksur ta’ 250 % jew aktar iżda ma jaqbiżx 900 %
film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 μm or more but not more than 90 μm, a tensile strength at break of 20 mpa or more but not more than 45 mpa and an elongation at break of 250 % or more but not more than 900 %