Réalisées par des traducteurs professionnels, des entreprises, des pages web ou traductions disponibles gratuitement.
Параллелепипед
primitive box
Dernière mise à jour : 2013-02-14
Fréquence d'utilisation : 1
Qualité :
Référence:
При использовании этой опции создается Параллелепипед по типу Тела (solid type).
this option creates a box of the solid type.
Dernière mise à jour : 2013-02-14
Fréquence d'utilisation : 1
Qualité :
Référence:
Если флажок снят, то создается Параллелепипед по типу Оболочки (shell type).
if it is unchecked, a box of the shell type will be created.
Dernière mise à jour : 2013-02-14
Fréquence d'utilisation : 1
Qualité :
Référence:
Благодаря этому Параллелепипед будет расположен на Рабочей Плоскости (work plane).
thus, the box will be located on the work plane.
Dernière mise à jour : 2013-02-14
Fréquence d'utilisation : 1
Qualité :
Référence:
С технологическими пустотами до 8%. Параллелепипед - 250х120х65мм. Вес - 3.2 кг.
with technological emptinesses to 8%. parallelepiped - 250õ120õ65ìì. weight - 3. 2 kg.
Dernière mise à jour : 2018-02-21
Fréquence d'utilisation : 1
Qualité :
Référence:
Геометрия > Простые Фигуры > Параллелепипед (geometry > primitive feature > box)
geometry > primitive feature > box
Dernière mise à jour : 2013-02-14
Fréquence d'utilisation : 1
Qualité :
Référence:
Avertissement : un formatage HTML invisible est présent
Если флажок установлен, диаграмма будет представлена как параллелепипед. Вращение его будет возможно только с помощью поля angle .
use this option to use orthogonal view and rotation. note that basic rotation will not be possible in this case.
Dernière mise à jour : 2018-02-21
Fréquence d'utilisation : 1
Qualité :
Référence:
Функция Использования Привязки (use snap) автоматически по щелчку мыши размещает Параллелепипед с углом в точке щелчка.
the use snap function automatically places a wedge cornered on the point of a mouse click upon the mouse click.
Dernière mise à jour : 2013-02-14
Fréquence d'utilisation : 2
Qualité :
Référence:
Выбор угловой точки щелчком мыши при выключенной функции Использования Привязки (use snap) только задаст ее координаты, при этом Параллелепипед не будет создан автоматически.
when a point is entered by a mouse click while the use snap function is turned off, only the coordinates of the corner point will be entered and the box will not be generated automatically.
Dernière mise à jour : 2013-02-14
Fréquence d'utilisation : 1
Qualité :
Référence:
Если кузов не имеет форму параллелепипеда, то распределение 12 точек измерения должно осуществляться наилучшим образом с учетом формы кузова.
if the body is not parallelepipedic, the 12 points of measurements shall be distributed as satisfactorily as possible having regard to the shape of the body.
Dernière mise à jour : 2017-01-03
Fréquence d'utilisation : 7
Qualité :
Référence: