Da traduttori professionisti, imprese, pagine web e archivi di traduzione disponibili gratuitamente al pubblico.
the type of pressure relief device, the set to discharge pressure and relief capacity of pressure relief devices, if required, shall be specified by the competent authority of the country of use.
Тип устройства для сброса давления, давление срабатывания и пропускная способность устройства для сброса давления определяются, в случае необходимости, компетентным органом страны использования.
Ultimo aggiornamento 2016-12-03
Frequenza di utilizzo: 1
Qualità:
6.6.2.8.5 when the shell is fitted for pressure discharge, the inlet line shall be provided with a suitable pressure-relief device set to operate at a pressure not higher than the mawp of the shell, and a stop-valve shall be fitted as close to the shell as reasonably practicable.
6.6.2.8.5 Если корпус оборудуется для сброса давления, предусматривается всасывающий патрубок с соответствующим ограничителем давления, срабатывающим при давлении, не превышающем МДРД корпуса, а запорный клапан устанавливается как можно ближе к корпусу.
Ultimo aggiornamento 2016-12-04
Frequenza di utilizzo: 1
Qualità:
6.6.2.9.2 the required pressure-relief device shall be set to start-to-discharge at a nominal pressure of five-sixths of the test pressure for shells having a test pressure of not more than 4.5 bar and 110% of two-thirds of the test pressure for shells having a test pressure of more than 4.5 bar.
6.6.2.9.2 Требуемый ограничитель давления должен быть отрегулирован на срабатывание при номинальном давлении, составляющем 5/6 испытательного давления для корпусов с испытательным давлением не более 4,5 бара и 110% от 2/3 испытательного давления для корпусов с испытательным давлением более 4,5 бара.
Ultimo aggiornamento 2016-12-04
Frequenza di utilizzo: 1
Qualità:
Alcuni contributi umani con scarsa rilevanza sono stati nascosti.
Mostra i risultati con scarsa rilevanza.