プロの翻訳者、企業、ウェブページから自由に利用できる翻訳レポジトリまで。
the locking device may be a:
blokovacím zariadením môže byť:
最終更新: 2014-11-21
使用頻度: 1
品質:
the locking out of service device shall:
pri vyradení z prevádzky sa:
最終更新: 2014-11-21
使用頻度: 1
品質:
shows how much time is left of the locking period.
ukazuje zvyšný čas zablokovania.
最終更新: 2017-04-26
使用頻度: 1
品質:
the lock symbol starts flashing, when the locking period is over.
symbol zámky začne blikať, keď sa doba zablokovania skončí.
最終更新: 2017-04-26
使用頻度: 1
品質:
it shall not be possible for the locking devices to be released inadvertently.
nebude možné neúmyseľne uvoľniť zabezpečovacie zariadenia.
最終更新: 2014-11-21
使用頻度: 1
品質:
it moves back and forth on the frame gathering information, using bands within infrared light or laser beams or other forms of measurement.
pohybuje sa na ráme dopredu a dozadu, zhromažďuje informácie a používa pri tom svetlo v infračervenej oblasti alebo laserové lúče, alebo iné spôsoby merania.
due to age-differences in plasma protein binding, the corresponding increase in free sildenafil plasma concentration was approximately 40 %.
vzhľadom na rozdiely vo väzbe na plazmatické bielkoviny, ktoré sú podmienené vekom, bolo zodpovedajúce zvýšenie plazmatických koncentrácií voľného sildenafilu približne 40 %.
‘combination’ means one of the specifically developed and constructed variations of a locking system which, when properly activated, permits operation of the locking system.
„kombinácia“ je jeden zo zvlášť vyvinutých a vyrobených variantov blokovacieho systému, ktorý po správnom uvedení do činnosti umožňuje činnosť blokovacieho systému.
'combination' means one of the specifically developed and constructed variations of a locking system which, when properly activated, permits operation of the locking system;
"kombinácia" znamená jeden zo zvlášť pripravených a zostavených variantov systému zamykania, ktorý po správnom uvedení do činnosti umožňuje prevádzku systému zamykania;
the opening at the centre of the locking pin shall be 60 mm + 0,5/- 1,5 mm and the depth of the jaw measured from the centre of the pin shall be 62 mm ± 0,5 mm.
otvor uprostred poistného čapu bude 60 mm + 0,5/-1,5 mm a hĺbka čeľuste meraná od stredu čapu bude 62 mm ± 0,5 mm.
the opening at the centre of the locking pin shall be 60 mm + 0,5/- 1,5 mm and the depth of the jaw measured from the centre of the pin shall be 62 mm +- 0,5 mm.";
otvor uprostred poistného čapu bude 60 mm + 0,5/—1,5 mm a hĺbka čeľuste meraná od stredu čapu bude 62 mm ± 0, 5 mm.";