Je was op zoek naar: end of machining program and repeat (d) (Engels - Frans)

Engels

Vertalen

end of machining program and repeat (d)

Vertalen

Frans

Vertalen
Vertalen

Vertaal onmiddellijk teksten, documenten en gesprekken met Lara

Nu vertalen

Menselijke bijdragen

Van professionele vertalers, bedrijven, webpagina's en gratis beschikbare vertaalbronnen.

Voeg een vertaling toe

Engels

Frans

Info

Engels

method and device for generation of machining program

Frans

procédé et dispositif de génération d'un programme d'usinage

Laatste Update: 2014-11-25
Gebruiksfrequentie: 3
Kwaliteit:

Waarschuwing: Bevat onzichtbare HTML-opmaak

Engels

preparation method of machining program of cylindrical groove shape

Frans

procede de preparation d'un programme d'usinage de rainures cylindriques

Laatste Update: 2014-11-25
Gebruiksfrequentie: 3
Kwaliteit:

Engels

separate from a line for the machining program, and the cnc device

Frans

distincte de la celle destinée au programme d'usinage, et la machine cnc

Laatste Update: 2011-07-27
Gebruiksfrequentie: 1
Kwaliteit:

Engels

between the end of the program and the beginning of the following program.

Frans

entre la fin de l’émission et le début de l’émission suivante.

Laatste Update: 2018-02-13
Gebruiksfrequentie: 1
Kwaliteit:

Engels

elaboration of cycle time studies, cnc machining programs and machining test.

Frans

Élaboration d’études de temps cycliques, de programmes d’usinage cnc et de tests d’usinage.

Laatste Update: 2018-02-13
Gebruiksfrequentie: 1
Kwaliteit:

Engels

this step looks out for an end of machining cycle command from the operator.

Frans

cette étape consiste à surveiller une commande de fin de cycle d'usinage exécutée par l'opérateur.

Laatste Update: 2014-12-03
Gebruiksfrequentie: 1
Kwaliteit:

Engels

is read from a machining program, and a holder designation code (t11xx) for designating the multi-tool holder provided to a magazine

Frans

est lue à l'aide d'un programme d'usinage et un code de désignation de support d'outil (t11xx) pour la désignation du support d'outils multiples est envoyé à un magasin

Laatste Update: 2011-07-27
Gebruiksfrequentie: 1
Kwaliteit:

Engels

[end of introduction] [table of contents of draft program and budget 2000-2001]

Frans

[fin de l'introduction] [table des matières du projet de programe et budget pour l'exercice biennal 2000-2001]

Laatste Update: 2015-05-14
Gebruiksfrequentie: 1
Kwaliteit:

Engels

the device extracts necessary machining information from the actual nc machining program and allows the data bases to reflect the information.

Frans

le moyen extrait les informations d'usinage nécessaires contenues dans le programme d'usinage cn existant et permet aux bases de données de renoyer ces informations.

Laatste Update: 2011-07-27
Gebruiksfrequentie: 1
Kwaliteit:

Engels

the machine also advantageously comprises means (not depicted) for automatically opening the cover 70 , these operating at the end of machining.

Frans

la machine comprend en outre avantageusement des moyens d'ouverture (non représentés) automatique du capot 70, fonctionnant en fin d'usinage.

Laatste Update: 2014-12-03
Gebruiksfrequentie: 1
Kwaliteit:

Engels

an nc apparatus which analyzes a machining program and controls a machine when machining a work according to the results of the analysis of the machining program

Frans

un appareil cn qui analyse un programme d'usinage et commande une machine lors de l'usinage d'un travail en fonction des résultats de l'analyse du programme d'usinage

Laatste Update: 2011-07-27
Gebruiksfrequentie: 1
Kwaliteit:

Engels

an nc apparatus which analyzes a machining program and controls a machine when machining a work according to the results of the analysis of the machining program.

Frans

l'invention concerne un appareil cn qui analyse un programme d'usinage et commande une machine lors de l'usinage d'un travail en fonction des résultats de l'analyse du programme d'usinage.

Laatste Update: 2014-12-03
Gebruiksfrequentie: 1
Kwaliteit:

Engels

in the beginning of execution of each machining program, therefore, its associated type of machining is determined (steps s2 to s5), and the values of the parameters for the program are automatically changed in accordance with the type of machining (steps s7 to s9)

Frans

au début de l'exécution de chaque programme d'usinage, le type d'usinage correspondant est déterminé (étapes s2 à s5), et les valeurs des paramètres de programme automatiquement modifiées selon le type d'usinage (étapes s7 à s9)

Laatste Update: 2011-07-27
Gebruiksfrequentie: 1
Kwaliteit:

Engels

for analyzing a machining program and outputting a command to move the axes and an on/off command to turn on/off a laser beam, interpolating means

Frans

conçus pour analyser un programme d'usinage et produire une instruction de déplacement des axes et une instruction de mise en marche/arrêt d'un faisceau laser, des moyens d'interpolation

Laatste Update: 2011-07-27
Gebruiksfrequentie: 1
Kwaliteit:

Engels



20.0 


16.4 


1.5 


1.6 


0.5 


. . . enter your organisation’s second program and repeat the above process

Frans



20,0 


16,4 


1,5 


1,6 


0,5 


. . . inscrivez le nom du deuxième programme de l’organisation et répétez les étapes ci-dessus.

Laatste Update: 2015-05-14
Gebruiksfrequentie: 1
Kwaliteit:

Engels

for generating a machining program consisting of machining start position and machining depth when electric discharge machining is performed using each electrode based on the electrode specification and the thickness data of a workpiece thus input

Frans

destinés à générer un programme d'usinage se composant d'une position de début d'usinage et d'une profondeur d'usinage lorsqu'un usinage par décharge électrique est effectué à l'aide de chaque électrode sur la base de la spécification d'électrode et des données d'épaisseur d'une pièce de fabrication ainsi entrées

Laatste Update: 2011-07-27
Gebruiksfrequentie: 1
Kwaliteit:

Engels

a device for analyzing nc program is provided with a machining method analyzing means which extracts machining conditions for every machining work element by analyzing an actual nc machining program, and data base creating means

Frans

on décrit un dispositif d'analyse de programme cn ainsi qu'un système d'analyse de procédé d'usinage qui extrait les conditions d'usinage pour chaque élément de travail d'usinage par l'analyse d'un programme d'usinage cn existant, et un moyen de création de base de données

Laatste Update: 2011-07-27
Gebruiksfrequentie: 1
Kwaliteit:

Engels

for comparing used tool information on the tool used in the machine when the machine is controlled by using the machining program and on the record of the tool holder to which the tool is attached with attached tool information stored in the attached tool data storage section

Frans

de comparaison d'information outil pour comparer l'information d'outil utilisé sur l'outil utilisé dans la machine lorsque la machine est commandée en utilisant le programme d'usinage et sur l'enregistrement du porte-outil auquel l'outil est associé avec l'information d'outil associé stockée dans la section

Laatste Update: 2011-07-27
Gebruiksfrequentie: 1
Kwaliteit:

Engels

the latest in a long line of industry standard cd changers, the dn-c200p is a five disc carousel model with cd and cdr, mp3 and wma compatibility, infra red control and random, program and repeat playback modes.

Frans

le dernier d'une longue lignée de changeurs cd industriels, le dn-c200p est un modèle à carrousel cinq disques, il est compatible cd, cdr, mp3 et wma avec commande infrarouge et modes de lecture aléatoire, programmée et répétitive.

Laatste Update: 2018-02-13
Gebruiksfrequentie: 1
Kwaliteit:

Engels

a single block is stopped at a place where error is found in the machining program, and the machining program is operated in the reverse direction until a predetermined block is reached and where the machining program is corrected to execute the operation of the machining program

Frans

on arrête un bloc unique à l'endroit où l'on trouve une erreur dans le programme d'usinage, et on fait revenir en arrière ledit programme jusqu'à ce qu'on ait atteint un bloc déterminé où l'on corrige le programme pour qu'il effectue l'opération envisagée

Laatste Update: 2011-07-27
Gebruiksfrequentie: 1
Kwaliteit:

Krijg een betere vertaling met
8,800,717,159 menselijke bijdragen

Gebruikers vragen nu voor assistentie



Wij gebruiken cookies om u de best mogelijke ervaring op onze website te bieden. Door de website verder te gebruiken, geeft u toestemming voor het gebruik van cookies. Klik hier voor meer informatie. OK