Je was op zoek naar: hardness (Engels - Maleis)

hardness
kekerasan

brush hardness
kekerasan berus

the woman's bag with grazing hardness he run away with motorcycle
ragut beg wanita itu dengan kekerasan dia lari dengan motorsikal

thenceforth were your hearts hardened: they became like a rock and even worse in hardness.
kemudian sesudah itu, hati kamu juga menjadi keras seperti batu, bahkan lebih keras lagi.

then, after that, your hearts were hardened and became as stones or even worse in hardness.
kemudian sesudah itu, hati kamu juga menjadi keras seperti batu, bahkan lebih keras lagi.

then, even after that, your hearts were hardened and became as rocks, or worse than rocks, for hardness.
kemudian sesudah itu, hati kamu juga menjadi keras seperti batu, bahkan lebih keras lagi.

• proper preheating helps to slow the cooling rate of the finished weld and reduce hardness in the heat affected zone (haz)
• pemanasan awal yang betul membantu memperlahankan kadar penyejukan kimpalan siap dan mengurangkan kekerasan di zon yang terjejas haba (haz)

deface, our lord, the features of their wealth, and send hardness to their hearts, so they will not believe until they see the grievous penalty."
wahai tuhan kami! binasakanlah harta benda mereka dan meteraikanlah hati mereka (sehingga menjadi keras membatu), maka dengan itu mereka tidak akan dapat beriman sehingga mereka melihat azab yang tidak terperi sakitnya.

adhesive wear adhesive wear occurs when two metals rub together with sufficient force to cause the removal of material from the less wear resistant surface. if the two metals have a comparable chemical analysis and hardness, a galling action can occur where one metal is actually welded to the other causing high and low spots where material is added or removed. the screw and barrel can come into contact with each other during operation. the screw is cantilevered in the barrel and is supported only at its shank and by the plastic in the barrel. when conditions cause excessive contact between the two components, adhesive wear and/or galling will occur on the screw flight od and the barrel wall. there are several causes of adhesive wear and galling, all of which can be prevented through the proper design, manufacture and use of the machinery components.
kejuruteraan mekanik