Van professionele vertalers, bedrijven, webpagina's en gratis beschikbare vertaalbronnen.
rotary valve
поворотный клапан
Laatste Update: 2014-12-01
Gebruiksfrequentie: 1
Kwaliteit:
derivative of the engine speed at the set point
Производная частоты вращения двигателя в установочной точке
Laatste Update: 2017-01-03
Gebruiksfrequentie: 6
Kwaliteit:
set point 1
Печать% 1
Laatste Update: 2011-10-23
Gebruiksfrequentie: 2
Kwaliteit:
set point parameter
Установить параметр точки
Laatste Update: 2011-10-23
Gebruiksfrequentie: 1
Kwaliteit:
lower set point:
Нижнее пороговое значение:
Laatste Update: 1970-01-01
Gebruiksfrequentie: 2
Kwaliteit:
the mean speed and torque shall be recorded at each set-point.
В каждой установочной точке регистрируются средние значения частоты вращения и крутящего момента.
Laatste Update: 2017-01-03
Gebruiksfrequentie: 6
Kwaliteit:
pcv (pressure control valve) opens when pressure exceeds the set point.
Кожух Предохранительный клапан Запорный кран (четыре единицы в комплекте)
Laatste Update: 2013-01-15
Gebruiksfrequentie: 1
Kwaliteit:
demanded torque with "sp " set point
Запрашиваемый крутящий момент с точкой установки "sp "
Laatste Update: 2016-12-04
Gebruiksfrequentie: 4
Kwaliteit:
Waarschuwing: Bevat onzichtbare HTML-opmaak
(1) pcv (pressure control valve) opens when pressure exceeds the set point.
(1) pcv (редукционный клапан) открывается когда давление превышает заданное значение.
Laatste Update: 2012-12-13
Gebruiksfrequentie: 1
Kwaliteit:
during this period, the set point may not be changed.
В течение этого времени заданное значение не может быть изменено.
Laatste Update: 2016-12-04
Gebruiksfrequentie: 1
Kwaliteit:
the fisher control-disk rotary valve is a finalist in the applied technology category.
Поворотный клапан fisher control-disk стал финалистом в номинации «Прикладные технологии» (applied technology).
Laatste Update: 2018-02-21
Gebruiksfrequentie: 1
Kwaliteit:
coolant temperature and coolant flow rate of the charge air cooler at the above set point shall not be changed for the whole test cycle.
В течение всего цикла испытания температура охлаждающей субстанции и расход потока охлаждающей субстанции в устройстве для охлаждения воздушного заряда в указанной выше установленной точке не должны изменяться.
Laatste Update: 2017-01-03
Gebruiksfrequentie: 2
Kwaliteit:
lower set point: fan speed constant at lowest fan speed.
Нижнее пороговое значение:
Laatste Update: 1970-01-01
Gebruiksfrequentie: 3
Kwaliteit:
the fan speed will continue to increase linearly until the inlet air temperature reaches the higher set point (see table 1).
Таблицу 1). При дальнейшем увеличении температуры воздуха скорость вентилятора будет возрастать линейно до тех пор, пока температура не достигнет верхнего порогового значения (см.
Laatste Update: 1970-01-01
Gebruiksfrequentie: 1
Kwaliteit:
almost the similar situation with primal fear, as always powerful and speed set.
Та же ситуация и с коллективом primal fear, известным мощными и быстрыми сетами.
Laatste Update: 2018-02-21
Gebruiksfrequentie: 1
Kwaliteit:
the fan speed will continue to increase linearly until the inlet air temperature reaches the higher set point (see table 1).
Пока температура не превысит нижнюю границу температурного диапазона, скорость вентилятора меняться не будет (см. Таблицу 1).
Laatste Update: 1970-01-01
Gebruiksfrequentie: 1
Kwaliteit:
the valve is designed to control the temperature at the inlet of lt charge air cooler in accordance with a fixed set point temperature by mixing the incoming water flows in correct proportions.
Клапан предназначен для регулировки температуры на входе ОНВ НТ в соответствии с фиксированной уставкой температуры, путем смешивания потоков поступающей воды в нужной пропорции.
Laatste Update: 2012-08-20
Gebruiksfrequentie: 1
Kwaliteit:
at temperatures above the higher set point, the fan will operate at its highest speed and noise level.
При дальнейшем увеличении температуры воздуха скорость вентилятора будет возрастать линейно до тех пор, пока температура не достигнет верхнего порогового значения (см.
Laatste Update: 1970-01-01
Gebruiksfrequentie: 1
Kwaliteit:
set points per section
Настройки на каждую секцию
Laatste Update: 2018-02-21
Gebruiksfrequentie: 1
Kwaliteit:
engine speed and torque command set points shall be issued at 5 hz (10 hz recommended) or greater.
Частота выдачи команд на установку частоты вращения и крутящего момента двигателя составляет не менее 5 Гц (рекомендуется 10 Гц).
Laatste Update: 2017-01-03
Gebruiksfrequentie: 8
Kwaliteit: