Je was op zoek naar: cooling medium (Engels - Sloveens)

cooling medium:
hladilno sredstvo:

main cooling medium
glavno hladilno sredstvo

cooling
hlajenje

cooling fan
ventilator za hlajenje

cooling: hce
hlajenje: hce

cooling system
hladilni sistem

cooling, regulation
ohlajanje, upravljanje

heating/cooling
ogrevanje/hlajenje

pumps for fuel, lubricants, cooling-medium and concrete
Črpalke za goriva, maziva, hladilne tekočine ter beton

fuel, lubricating or cooling-medium pumps for internal combustion engines
Črpalke za gorivo, mazalne in hladilne medije batnih motorjev z notranjim zgorevanjem

fuel, lubricating or cooling medium pumps for internal combustion piston engines
Črpalke za gorivo, mazalne in hladilne medije batnih motorjev z notranjim zgorevanjem

cpa 28.13.11: pumps for fuel, lubricants, cooling-medium and concrete
cpa 28.13.11: Črpalke za goriva, maziva, hladilne tekočine ter beton

the temperature of the cooling medium and the temperature of the charge air have to be recorded.
temperaturo hladilnega sredstva in polnilnega zraka je treba zabeležiti.

the temperature of the cooling medium shall be at least 293 k (20 °c).
temperatura hladilnega sredstva naj bo najmanj 293 k (20 °c).

the temperature of the cooling medium must be at least 293 k (20 °c).
temperatura hladilnega sredstva mora biti najmanj 293 k (20 °c).

the temperature of the cooling medium shall be at least 293 k (20 °c).
temperatura hladilnega sredstva je najmanj 293 k (20 °c).

the temperature of the cooling medium shall be at least 293 k (20 oc).
temperatura hladilnega sredstva je najmanj 293 k (20 oc).

low/medium temperature solar thermal applications for hot water, heating, cooling, industrial processes
sončne toplotne naprave z nizko/srednjo temperaturo za toplo vodo, ogrevanje, hlajenje, industrijske procese

rotary positive displacement pumps, power-driven (excl. those of subheading 8413.11 and 8413.19 and fuel, lubricating or cooling medium pumps for internal combustion piston engine)
tlačne črpalke z rotacijskim gibanjem in pogonom (razen črpalk iz tarifnih podštevilk 8413 11 in 8413 19 ter črpalk za gorivo, mazalne in hladilne medije batnih motorjev z notranjim izgorevanjem)

at high engine loads, the tunnel may be cooled by a non-aggressive means such as a circulating fan, as long as the temperature of the cooling medium is not below 293k (20 °c).
pri velikih obremenitvah motorja se lahko tunel hladi z neagresivnimi sredstvi, npr. z ventilatorjem, dokler temperatura hladilnega sredstva ni pod 293 k (20 °c).