Van professionele vertalers, bedrijven, webpagina's en gratis beschikbare vertaalbronnen.
tray
bandeja
Laatste Update: 2014-12-09
Gebruiksfrequentie: 28
Kwaliteit:
tray.
setting.
Laatste Update: 2018-02-13
Gebruiksfrequentie: 1
Kwaliteit:
- tray
- tray
Laatste Update: 2018-02-13
Gebruiksfrequentie: 2
Kwaliteit:
material / firing trays
material / bandejas refractarias
Laatste Update: 2014-04-05
Gebruiksfrequentie: 1
Kwaliteit:
Gelieve het te verwijderen indien je dit meent.
s, as the tray material heats, it sags below the retention arm.
s , mientras que el material de la cubeta se calienta, se pandéa por debajo del brazo de retención.
Laatste Update: 2014-04-07
Gebruiksfrequentie: 2
Kwaliteit:
Gelieve het te verwijderen indien je dit meent.
all the collected material is thrown into the same tray.
el conjunto de la materia recogida se rechaza en uno sólo y mismo recipiente.
Laatste Update: 2018-02-13
Gebruiksfrequentie: 1
Kwaliteit:
t, the vacuum is turned on and the heated tray material is brought down over the model.
t , se enciende el vacío y el material caliente de la cubeta se desciende rápidamente sobre el modelo.
Laatste Update: 2014-04-07
Gebruiksfrequentie: 2
Kwaliteit:
Gelieve het te verwijderen indien je dit meent.
the material options for at-home bleaching include bleaching trays.
las opciones de material de blanqueamiento casero incluyen cubetas de blanqueamiento.
Laatste Update: 2014-04-15
Gebruiksfrequentie: 1
Kwaliteit:
Gelieve het te verwijderen indien je dit meent.
r, the model is placed on the vacuum former, and the plastic tray material is secured on the heating platform.
r , el modelo se coloca en la formadora al vacío y el material de la cubeta plástica se asegura en la plataforma de termoformado.
Laatste Update: 2014-04-15
Gebruiksfrequentie: 3
Kwaliteit:
Gelieve het te verwijderen indien je dit meent.
the vacuum is turned on at the same time as the entire upper armature including the heated tray material is quickly brought down over the model (figure 14-31, t).
luego se enciende el vacío al mismo tiempo que la totalidad del inducido superior incluyendo el material caliente de la cubeta se desciende rápidamente sobre el modelo (figura 14-31, t).
Laatste Update: 2014-04-07
Gebruiksfrequentie: 2
Kwaliteit:
Gelieve het te verwijderen indien je dit meent.
it is possible to trim the tray material into the final intra-oral form with scissors, but it is much easier to accomplish this with a heated instrument (trim-rite electric knife).
es posible recortar el material de la cubeta hasta su forma intra-oral final con unas tijeras, pero es mucho más fácil lograr esto con un instrumento caliente (cuchilla eléctrica trim-rite).
Laatste Update: 2014-04-07
Gebruiksfrequentie: 2
Kwaliteit:
Gelieve het te verwijderen indien je dit meent.
the model is then placed on the suction surface of the vacuum former; the plastic tray material is secured in the upper armature close to the heating element (figure 14-31, r).
el modelo se coloca en la superficie de succión de la formadora al vacio; el material de la cubeta plástica está protegido en el inducido superior cerca de la resistencia de calentamiento (figura 14-31, r ).
Laatste Update: 2014-04-07
Gebruiksfrequentie: 2
Kwaliteit:
Gelieve het te verwijderen indien je dit meent.
trays
bandeja
Laatste Update: 2014-12-09
Gebruiksfrequentie: 3
Kwaliteit: