Je was op zoek naar: calib (Frans - Engels)

Frans

Vertalen

calib

Vertalen

Engels

Vertalen
Vertalen

Vertaal onmiddellijk teksten, documenten en gesprekken met Lara

Nu vertalen

Menselijke bijdragen

Van professionele vertalers, bedrijven, webpagina's en gratis beschikbare vertaalbronnen.

Voeg een vertaling toe

Frans

Engels

Info

Frans

calib.:

Engels

ref.:

Laatste Update: 2012-04-11
Gebruiksfrequentie: 6
Kwaliteit:

Frans

mesures calib-tech inc.montréal (québec)
numéro de certificat:

Engels

mesures calib-tech inc.montreal, quebec
certificate number:

Laatste Update: 2015-05-14
Gebruiksfrequentie: 1
Kwaliteit:

Frans

mettre le sélecteur de commutation com 2 en position calib (étalonnage). d.

Engels

(c) place the selector switch sw2 in the calib position.

Laatste Update: 2015-05-14
Gebruiksfrequentie: 1
Kwaliteit:

Frans

calib. : 370 mbq/5 ml à 23h00 cet le (jj/mm/aaaa)

Engels

ref.: 370 mbq/5 ml at 2300 cet on dd/mm/yyyy

Laatste Update: 2017-04-26
Gebruiksfrequentie: 2
Kwaliteit:

Frans

mettre le sélecteur de commutation com 2 en position calib (étalonnage).

Engels

place the selector switch sw2 in the calib position.

Laatste Update: 2015-05-14
Gebruiksfrequentie: 1
Kwaliteit:

Frans

procédé selon la revendication 9, dans lequel fpc delv varie de fpc calib à la vitesse de ralenti du moteur à fpc calc à wot.

Engels

a method as claimed in claim 9, wherein fpc delv changes from fpc calib at idle engine speed to fpc calc at wot.

Laatste Update: 2014-12-04
Gebruiksfrequentie: 2
Kwaliteit:

Frans

passer de la position calib à l'une ou a plusieurs des autres positions du sélecteur de commutation pour voir si le défaut persiste.

Engels

if a balance is obtained in the other switch position(s) check the calibration resistors visually for an open or short circuit.

Laatste Update: 2015-05-14
Gebruiksfrequentie: 1
Kwaliteit:

Frans

4.3.5 vÉrification de la sensibilitÉ du galvanomÈtre la sensibilité du galvanomètre peut être vérifiée en mettant le sélecteur de commutation com 2 à la position calib.

Engels

4.3.5 testing galvanometer sensitivity the galvanometer sensitivity may be tested by placing switch sw2 of the rtt in the calib position.

Laatste Update: 2015-05-14
Gebruiksfrequentie: 1
Kwaliteit:

Frans

passer de la position calib à l'une ou a plusieurs des autres positions du sélecteur de commutation pour voir si le défaut persiste.

Engels

switch from calib to one or more of the other positions of the selector switch to see if the same fault exists.

Laatste Update: 2015-05-14
Gebruiksfrequentie: 1
Kwaliteit:

Frans

15. il est proposé de corriger les données des enquêtes sur le budget des ménages sur la base d'un étalonnage, en utilisant le système g-calib.

Engels

15. hbs data adjustment is to be carried out on the basis of a calibration procedure with the use of the g-calib programme.

Laatste Update: 2016-12-01
Gebruiksfrequentie: 1
Kwaliteit:

Frans

4.3.2 l'indicateur de type d (ancien modÈle) ne s'Étalonne pas correctement vérifier que l'interrupteur int 1 (voir figure 12) est en position on (marche) et que le sélecteur de commutation com 2 est en position calib.

Engels

4.3.2 indicator type d (old) fails to calibrate properly verify that switch sw1 (see figure 12), is in on position and that sw2 is in calib position.

Laatste Update: 2015-05-14
Gebruiksfrequentie: 1
Kwaliteit:

Krijg een betere vertaling met
10,388,471,977 menselijke bijdragen

Gebruikers vragen nu voor assistentie



Wij gebruiken cookies om u de best mogelijke ervaring op onze website te bieden. Door de website verder te gebruiken, geeft u toestemming voor het gebruik van cookies. Klik hier voor meer informatie. OK