Você procurou por: bright field , dark field on one side (Inglês - Khmer)

try to get all the enemies together, by going to the middle then down. now trap them in the trough at the bottom, ignoring the gold there for now. stand on one side just above the trough, then drop down one square as the enemies get above the trough. collect all the gold not in the trough, then release the enemies and lead them around over the tops of ladders, until they drop their gold.
ព្យា​យាម​ធ្វើ​ឲ្យ​សត្រូវ​ទាំង​អស់​នៅ​ជុំ​គ្នា ដោយ​ដើរ​ទៅកណ្តាល​បន្ទាប់​មក​ចុះ​ក្រោម​ ។ ឥឡូវ​ ដាក់​អន្ទាក់​ពួក​គេ​នៅ​ក្នុងស្នូក​នៅ​ខាង​ក្រោម​ ដោយ​មិន​ខ្វល់​អំពី​មាសនៅ​ទី​នោះ​ទេ​ក្នុង​ពេល​នេះ​ ។ ឈរ​លើ​ផ្នែក​ម្ខាង​ឲ្យ​ចំ​ពី​​លើ​ស្នូក​ បន្ទាប់​មក​ទម្លាក់​ខ្លួន​ទៅ​កាន់​ការ៉េ​មួយ​នៅ​ពេល​ ដែល​សត្រូវ​ឡើង​មក​ដល់​លើ​ស្នូក​ ។ ប្រមូល​មាស​ទាំង​អស់​មិនមែន​នៅ​ក្នុង​ស្នូក​ទេ​ បន្ទាប់​មក​ដោះ​លែង​សត្រូវ​ ហើយ​នាំ​ពួក​គេ​ ទៅ​មក​ពីលើ​ក្បាល​ជណ្តើរ​ រហួត​ដល់​ពួក​គេ​ទម្លាក់​មាស​របស់​ពួក​គេ​ចោល​ ។

duplex printing: these controls may be grayed out if your printer does not support duplex printing (i. e. printing on both sides of the sheet.) these controls are active if your printer supports duplex printing. you can choose from 3 alternatives: none. this prints each page of the job on one side of the sheets only. long side. this prints the job on both sides of the paper sheets. it prints the job in a way so that the backside has the same orientation as the front side if you fold the paper over the long edge. (some printer drivers call this mode duplex-non-tumbled.) short side. this prints the job on both sides of the paper sheets. it prints the job so that the backside has the reverse orientation from the front side if you turn the paper over the long edge, but the same orientation, if you turn it over the short edge. (some printer drivers name this mode duplex-tumbled.) additional hint for power users: this kdeprint gui element corresponds to the cups command line job option parameter: -o duplex=... # examples: "tumble" or "two-sided-short-edge"
គ្មាន