Обучается переводу с помощью примеров, переведенных людьми.
От: Машинный перевод
Предложите лучший перевод
Качество:
Добавлены профессиональными переводчиками и компаниями и на основе веб-страниц и открытых баз переводов.
operating mode of the wireless network
របៀបប្រតិបត្តិការរបស់បណ្ដាញខ្សែ
Последнее обновление: 2011-10-23
Частота использования: 1
Качество:
show a simple mode of the address book view.
បង្ហាញរបៀបធម្មតារបស់ទិដ្ឋភាពសៀវភៅអាសយដ្ឋាន & # 160; ។
Последнее обновление: 2011-10-23
Частота использования: 1
Качество:
Предупреждение: Содержит скрытое HTML-форматирование
these control the mode of the channel. only an operator can change these. a protected channel requires users to enter a password in order to join.
ទាំងនេះត្រួតពិនិត្យ របៀប ឆានែល & # 160; ។ មានតែការីប៉ុណ្ណោះអាចផ្លាស់ប្ដូរ & # 160; ។ ប្រធានបទ មានន័យមានតែការីឆានែលអាចផ្លាស់ប្ដូរប្រធានបទសម្រាប់ឆានែល & # 160; ។
Последнее обновление: 2011-10-23
Частота использования: 1
Качество:
Предупреждение: Содержит скрытое HTML-форматирование
these control the mode of the channel. only an operator can change these. the t opic mode means that only the channel operator can change the topic for the channel.
ទាំងនេះត្រួតពិនិត្យ របៀប ឆានែល & # 160; ។ មានតែការីប៉ុណ្ណោះអាចផ្លាស់ប្ដូរ & # 160; ។ ប្រធានបទ មានន័យមានតែការីឆានែលអាចផ្លាស់ប្ដូរប្រធានបទសម្រាប់ឆានែល & # 160; ។
Последнее обновление: 2011-10-23
Частота использования: 1
Качество:
Предупреждение: Содержит скрытое HTML-форматирование
select the channel mode of the resulting mp3 file: stereo in this mode, the encoder makes no use of potential correlations between the two input channels; it can, however, negotiate the bit demand between both channel, i. e. give one channel more bits if the other contains silence or needs fewer bits because of a lower complexity. joint-stereo in this mode, the encoder will make use of correlations between both channels. the signal will be matrixed into a sum ("mid"), computed by l+r, and difference ("side") signal, computed by l-r, and more bits are allocated to the mid channel. this will effectively increase the bandwidth if the signal does not have too much stereo separation, thus giving a significant gain in encoding quality. mono the input will be encoded as a mono signal. if it was a stereo signal, it will be downsampled to mono. the downmix is calculated as the sum of the left and right channel, attenuated by 6 db.
ជ្រើសរបៀសឆានែលសម្រាប់លទ្ធផលឯកសារ mp3 & # 160; ៖ ស្តេរ៉េអូ ក្នុងរបៀបនេះ, អ៊ិនកូដឌ័រមិនប្រើសក្តានុពលការជាប់ទាក់ទងរវាងឆានែលពីបញ្ចូល; វាអាច, ទោះបីជា, ចរចាប៊ីតទាមទារវាងឆានែលទាំងពីឆានែល, ឧទាករណ៍ & # 160; ៖ ផ្តល់ឆានែលមួយមានប៊ីតច្រើនបើចំណុះនៅស្ងៀម ឬ ត្រូវការប៊ីត២ ឬ ៣ ដោយសារតែភាពស្មុគស្មាញមានកម្រិតទាប & # 160; ។ joint- stereo in this mode, the encoder will make use of correlations between both channels. the signal will be matrixed into a sum ("mid"), computed by l+r, and difference ("side") signal, computed by l- r, and more bits are allocated to the mid channel. this will effectively increase the bandwidth if the signal does not have too much stereo separation, thus giving a significant gain in encoding quality. mono the input will be encoded as a mono signal. if it was a stereo signal, it will be downsampled to mono. the downmix is calculated as the sum of the left and right channel, attenuated by 6 db.
Последнее обновление: 2011-10-23
Частота использования: 1
Качество:
Предупреждение: Содержит скрытое HTML-форматирование
Несколько пользовательских переводов с низким соответствием были скрыты.
Показать результаты с низким соответствием.