Je was op zoek naar: endanzug (Duits - Engels)

Duits

Vertalen

endanzug

Vertalen

Engels

Vertalen
Vertalen

Vertaal onmiddellijk teksten, documenten en gesprekken met Lara

Nu vertalen

Menselijke bijdragen

Van professionele vertalers, bedrijven, webpagina's en gratis beschikbare vertaalbronnen.

Voeg een vertaling toe

Duits

Engels

Info

Duits

insbesondere sehr hohe abtastraten (10 khz) ermöglichen das erfassen harter schraubfälle im endanzug.

Engels

especially very high sampling rates (10 khz) allow for the torque acquisition of hard screw-joints.

Laatste Update: 2018-02-13
Gebruiksfrequentie: 1
Kwaliteit:

Duits

bei elektronisch gesteuerten schraubsystemen werden die einflüsse der massenträgheit dadurch reduziert, dass im endanzug die drehzahl verringert wird.

Engels

with electronically controlled screwdriving-systems, the influence of the inertia is reduced because the driver slows down when reaching the end of the tightening process.

Laatste Update: 2018-02-13
Gebruiksfrequentie: 1
Kwaliteit:

Duits

zum beispielerlaubtdas reibwertverfahren ein erkennen der schraubenkopfauflage und davon ausgehend einen klar definierten endanzug über drehmoment- und/oder drehwinkelwerte.

Engels

for example, the friction-torque tightening process allows the recognition of the seating of the screw and the therefore clearly defined final-tightening by torque and/or angle.

Laatste Update: 2018-02-13
Gebruiksfrequentie: 1
Kwaliteit:

Duits

verwendung von mehreren werkzeugen an der selben schraubstelle mit unterschiedlichen parametern (z.b. vor- und endanzug)

Engels

use of several tool at the same bolt connection with different parameters (e.g. pre- and final tightening of a screw)

Laatste Update: 2018-02-13
Gebruiksfrequentie: 1
Kwaliteit:

Duits

nach dem ausformen des fließlochs wird die drehzahl herabgesetzt, es folgen der voranzug der schraube bis zur kopfauflage und der endanzug des verbindungselements auf die zuvor festgelegten parameter drehmoment und drehwinkel.

Engels

after the flow passage has been formed the speed is reduced and the screw is tightened to the head connecting surface and then the final tightening of the fastener to the pre-determined parameters of torque and angle takes place.

Laatste Update: 2018-02-13
Gebruiksfrequentie: 1
Kwaliteit:

Duits

dabei dientim endanzug der drehwinkel und nicht das drehmoment als steuergröße. d.h. die schraube wird bis zu einem schwellmoment angezogen und von dort aus um einen vorgegebenen nachspannwinkel weitergedreht.

Engels

this means that the screw is being tightened to a predetermined threshold and then further rotated by a predetermined post-tension angle.

Laatste Update: 2018-02-13
Gebruiksfrequentie: 1
Kwaliteit:

Duits

dies kann z.b. durch ein anziehen auf 80 % des endmomentes, einer nachfolgenden wartezeit und darauf folgendem endanzug geschehen. es sind hier praktisch beliebige kombinationen von voranzug, wartezeit, lösen der verbindung, erneutem anzug denkbar.

Engels

in such a case, it is possible to tighten the fastener to about 80% of the final torque, then apply a short waiting period and consequently tighten the fastener to the required final torque. it is practically possible to use any combination of pre-torque, stand-by, loosening and renewed tightening of any connection.

Laatste Update: 2018-02-13
Gebruiksfrequentie: 1
Kwaliteit:

Krijg een betere vertaling met
10,388,471,977 menselijke bijdragen

Gebruikers vragen nu voor assistentie



Wij gebruiken cookies om u de best mogelijke ervaring op onze website te bieden. Door de website verder te gebruiken, geeft u toestemming voor het gebruik van cookies. Klik hier voor meer informatie. OK