Você procurou por: may kindly be approved (Francês - Inglês)

may kindly be approved
may kindly be approved

each light must be approved.
(e) outlet.

why does my post need to be approved?
why does my post need to be approved?

advance notice is required and must be approved.
advance notice is required and must be approved.

probably this national strategy could be approved in 2008.
the ministry of environment had announced the creation of a working group whit the autonomous communities for elaboration the national strategy on invasive alien species, taking into account the action plan and the international guidelines on the subject.

(b) each raft and each life preserver must be approved.
(4) each automatic alternate air door must have an override means accessible to the flight crew.

(b) each life raft and each life preserver shall be approved.
(b) there shall be means to warn the crew if the rotor brake has not been completely released before takeoff.

the political agreement is to be approved by the european parliament and the council.
the political agreement is to be approved by the european parliament and the council.

plants will not be approved on a community basis until certificates have been adopted.
/ plants will not be approved on a community basis until certificates have been adopted.

agreements anall be approved by the niskrmoon corporatìonand sha.1i be ìmplemented under ìls supervìsíon and responsibiuty.
the list of cree candidates contemplated under 10.5.4 b) hereof shall be forwarded to nadoshtin companeeniskamoon corporation by the concerned cree parties.

527.1383 landing lights (a) each required landing or hovering light must be approved.
527.967 fuel tank installation (a) [each fuel tank must be supported so that tank loads are not concentrated on unsupported tank surfaces.

therefore, the awp 2004 could only be approved in september 2004 and the first call for proposals was launched end of 2004.
preparatory action to support civil society in the new eu member states implementation of this preparatory action has taken much longer than expected because of the very high response rate to the call for proposals.

joint bodies define the training needs with social partners and training centres, before be approved by the ministry of education.
analytic report – vet system 1 ecvet dimensions 1- strong or weak impact of certification/ 1- 1 two main certification bodies: - companies/joint bodies - training centres/trainers 1-2 role/ responsibility in the definition of training needs companies/joint bodies have a very important role in definition of training needs.

the level of intelligibility shall be approved by the minister. repeated aural or visual playback of the record may be used in evaluating intelligibility.
(c) for single engine rotorcraft, the quantity of extinguishing agent and the rate of discharge shall provide at least one adequate discharge for the engine compartment.

i acknowledge that should this project be approved for funding, i will be required to enter in a formal agreement which will outline the terms and conditions.
je prends acte que, si ce projet est approuvé, je devrai signer un accord officiel dans lequel seront énoncées les modalités du programme.

(factiva) _____. 8 février 2009. « buddhism on tv should be approved: cambodian pm ».
_____. 8 february 2009. “buddhism on tv should be approved: cambodian pm.” (factiva)

justification (amendment 29-32) according to article 4, active substances can only be approved if safe uses have been identified through risk assessments.
regulating plant protection products on the basis of the properties of their active substances without taking into account their actual uses and exposure undermines the principle of decisions based on risk assessments.

(e) each pressure altimeter shall be approved and calibrated to indicate pressure altitude in a standard atmosphere with a minimum practicable calibration error when the corresponding static pressures are applied.
one hour of continuous operation at 80 per cent of maximum continuous torque and the minimum speed for use with 80 percent of maximum continuous torque shall be conducted. (f) endurance tests; 60 percent of maximum continuous run.

(d) each pressure altimeter must be approved and must be calibrated to indicate pressure altitude in a standard atmosphere, with a minimum practicable calibration error when the corresponding static pressures are applied.
(3) fluid pressures developed during maximum limit accelerations, and deflections, of the aeroplane with a full tank. (4) fluid pressures developed during the most adverse combination of aeroplane roll and fuel load.

525.1329 automatic pilot system (a) each automatic pilot system must be approved and must be designed so that the automatic pilot can be quickly and positively disengaged by the pilots to prevent it from interfering with their control of the aeroplane.
(b) spaces adjacent to tank surfaces must be ventilated to avoid fume accumulation due to minor leakage. if the tank is in a sealed compartment, ventilation may be limited to drain holes large enough to prevent excessive pressure resulting from altitude changes.